212 Manuals

Anaheim Automation BLD75 1

Manuals and User Guides for Anaheim Automation BLD75 1. We found 2 manuals for free downloads User's Guide

Below you will find brief information for Step Motor Driver BLD75 BLD75-1. This driver provides unipolar bilevel operation, handling 6 and 8-lead motors rated from 1 to 7 amps/phase. It features short circuit, open circuit, over/under voltage, and over-temperature protection with a fault LED and output. Select from full-step or half-step operation, and choose between Clock and Direction or Dual Clock modes using jumper JP2. A transformer (AA2791 or AA2793 recommended) is required.

Key Features

Unipolar Bilevel Drive
10 Amps Peak Current
Multiple Fault Detection
Half-Step/Full-Step Operation
Adjustable Kick Current
Motor ON/OFF Control

Anaheim Automation BLD75-1 Step Motor Driver User's Guide

Pages: 12 Anaheim Automation BLD75 1 User's Guide

Brand: Anaheim Automation Category: Electrical equipment & supplies Size: 546 KB

Languages: English

Open manual

Frequently Answers and Questions

How do I select between half-step and full-step operation?

Use pin 8 (Excitation Mode Select). Logic "1" (open) is half-step, Logic "0" is full-step.

What type of transformer is required?

Anaheim Automation recommends the AA2791 or AA2793 transformers (300VA). These provide high, low, and logic voltages.

What does the fault LED indicate?

The number of blinks corresponds to the fault type: 1 blink - short/over current, 2 blinks - open motor/connection, 3 blinks - high voltage, 4 blinks - low voltage, 5 blinks - over temperature.

How do I adjust the kick current?

Use a small screwdriver to adjust the potentiometer on the driver, aligning the arrow with the motor's rated current (amps/phase).