Ascon tecnologic K48

Manuales y guías de usuario para Ascon tecnologic K48. Encontramos 6 manuales para descargas gratuitas quick guide, Manual, Owner's manual

The K48 Controller and Mini-programmer is a compact and versatile device that is ideal for various control and automation applications. It offers a range of features, including PID control, ON/OFF control, autotuning, program execution, and alarm management.

Características clave

  • PID control

  • ON/OFF control

  • Autotuning

  • Program execution

  • Alarm management

páginas: 2 Ascon tecnologic K48 quick guide

Marca: Ascon tecnologic Categoría: Measuring, testing & control Tamaño: 2 MB

Idiomas: English

Abrir manual

Otros manuales y documentos

36 páginas

Manual

Idiomas: English

40 páginas

Owner's manual

Idiomas: German

36 páginas

Owner's manual

Idiomas: Italian

36 páginas

Owner's manual

Idiomas: Spanish

36 páginas

Owner's manual

Idiomas: Spanish

Frequently Answers and Questions

How to enter the configuration mode?

Press the button for more than 5 seconds. If the password is correct, the display will show the acronym of the first parameter group preceded by the symbol '.'.

What is the default password for configuration parameters?

The factory default password for configuration parameters is 30.

How to exit the configuration mode?

Push the button for more than 5 seconds. The instrument will come back to the “standard display”.

What are the typical values loaded in the instrument prior to shipping from factory?

The default data are the typical values loaded in the instrument prior to shipping from factory. These are the factory default parameter settings.

Preguntas y respuestas

2024-12-12

H H I

How to program alarms on a K48 instrument?

Access configuration mode and modify alarm parameters. Alarm configuration is password-protected (level 3).

How to perform a reading correction on a K48 instrument?

For linear inputs, adjust parameters '[4] SSc' (Initial scale read-out) and '[5] FSc' (Full scale read-out). Temperature input calibration follows EN 60751/A2 (for RTD Pt100) and EN 60584-1 (for thermocouples). RTD Pt100 line resistance compensation is automatic (up to 20Ω/wire, with a maximum error of ±0.1% of the input range). For thermocouples, use appropriate (preferably shielded) compensation cable.

Anuncio