Askey Computer Corp Modem Card
のためのマニュアルとユーザーガイド Askey Computer Corp Modem Card. 見つかりました 1 無料ダウンロード用マニュアル User manual
Below you will find brief information for modem card. This manual describes how to operate your new modem. Instructions for installing your modem are in the Installation Manual. The information in this manual deals exclusively with the operation of the modem after it has been installed, such as the command set, internal configuration registers, troubleshooting and testing.
主な特徴
Send and receive FAX messages over the telephone line
Communicate with other computers, terminals or BBS's
Standard AT command set
Fully compatible with ITU-T V.42, V.42bis, V.34 (ANNEX 12), V.32bis, V.32, V.22bis, V.23, V.22, V.21, MNP 2-5, Bell 103, 212A, K56flex and/or V.90
Compatible with ITU-T V.27ter and V.29, V.17, T.4 and T.30
Switching between DATA mode operation and FAX mode operation
ページ: 46 Askey Computer Corp Modem Card User manual
ブランド: Askey Computer Corp カテゴリー: Modems サイズ: 163 KB
言語: English
マニュアルを開くよくある質問と回答
What is the purpose of this modem?
This modem combines the features of a 56000(receive only)/33600/28800/14400/9600 bps data modem and a 14400/9600 bps FAX modem. It allows your personal computer to send and receive FAX messages over the telephone line like a standard FAX machine and to communicate with other personal computers, terminals or BBS's through the data modem functions.
How do I switch between Data and Fax modes?
Switching between DATA mode operation and FAX mode operation of your Fax/Data Modem is done through its firmware, no hardware settings are required.
What are the compatibility standards for this modem?
When used as a data modem your Fax/Data Modem uses the standard AT command set and is fully compatible with ITU-T V.42, V.42bis, V.34 (ANNEX 12), V.32bis, V.32, V.22bis, V.23, V.22, V.21, MNP 2-5, Bell 103, 212A, K56flex and/or V.90. When used as a Fax/Data Modem it communicates with all ITU-T Group 3 FAX machines and is compatible with ITU-T V.27ter and V.29, V.17, T.4 and T.30.
広告