Avery Berkel FX 50
Manuals and User Guides for Avery Berkel FX 50. We found 3 manuals for free downloads: User Guide, User manual
user manual
Brand: Avery Berkel Category: Kitchen scales Size: 802 KB Pages: 25
Languages: English
Table of contents
- 3 © Avery Berkel Limited 2007. All rights reserved.
- 3 Trademarks and ackowledgements
- 3 IMPORTANT
- 7 Contents
- 9 1. Entering the service mode
- 9 1. Remove any items from the weigh pan.
- 9 2. Press the On switch to turn the scale on.
- 9 3. While the scale is self-checking itself (that is, while all the numbers on the three diplays count down from all nines to all zeros) press the key. The weight display shows Pn which prompts you to enter the password.
- 9 4. To enter the password, press the key four times (type 0000). The display shows Pn----.
- 9 5. Press the key to accept the password. The display shows CAL F0. This is the first option (F0) that you use the calibrate the scale.
- 9 6. Press and release the service button on the underside of the scale.
- 9 7. Press the key to enter an option.
- 10 Fig 1-1. Service seal and button location
- 10 8. Press the key to come out of the option you selected and return to the service menu.
- 10 9. Press the key to come out of the service menu and return to weighing.
- 11 2. Calibrating/configuring the scale
- 11 1. Set the gravity compensation zone rate to 1.0000. This is option F11.
- 11 2. Press the key to enter the calibration function. The scale displays unLoAd.
- 11 3. Remove any weight from the weigh pan.
- 11 4. Press the key. The display shows the calibration weight you requested.
- 11 5. Put the calibration weight on the weigh pan.
- 11 6. Press the key to accept.
- 11 7. Check that all three displays show ------. The scale calibrates, any message appears for a short time on the display and then the display returns to the menu.
- 11 8. Repeat the steps above to calibrate the scale if the scale displays any message other than SPAn PASS.
- 12 1. Press the key to scroll through the three resolution values of 3000, 6000 or dUAL rAnGE.
- 12 2. Press the key to accept the value shown.
- 12 1. Press the key to scroll through the two units of weight options of KiLoS (kilos) or PoUndS.
- 12 2. Press the key to accept the value shown.
- 12 1. Press the key to scroll through the capacity of the scale options.
- 12 2. Press the key to accept the value shown.
- 12 1. Press the key to scroll through the numbers 0, 1, 2 or 3 that represent the number of units that the scale displays after the decimal point in the weight display. Alternatively, press the number keys of 0, 1, 2 or 3.
- 12 2. Press the key to accept the value shown.
- 13 1. Press the key to scroll through the numbers 0, 1, 2, 3 or 4 that represent the number of units that the scale displays after the decimal point in the price display. Alternatively, press the number keys of 0, 1, 2, 3 and 4.
- 13 2. Press the key to accept the value shown.
- 13 1. Press the key to scroll through the initialization zero range from 0 to 20.
- 13 2. Press the key to accept the value shown.
- 13 1. Press the key to scroll through the manual zero range 0 to 20.
- 13 2. Press the key to accept the value shown.
- 14 1. Press the key to scroll through the three countries of operation options of USA, EuroPE and AUStra (Australia).
- 14 2. Press the key to accept the value shown.
- 14 1. Press the key to set the percentage tare option to on or oFF.
- 14 2. Press the key to accept the value shown.
- 15 1. Divide the intended customer location of Denmark by the calibration location of Birmingham (9.81616 divided by 9.81287) to get a result of 1.00034 (rounded to five decimal places).
- 15 2. Enter the gravity compensation zone rate of 1.00034 using the number keys .
- 15 3. Press the key to accept the value you entered.
- 15 4. If you do not need to enter a value for the gravity compensation zone rate (if the scale will be used at the same location where it was calibrated) set the rate to 1.0000.
- 17 3. Recommended configuration options
- 19 4. Parts list for FX50 3000E model
AWT35-000315
Brand: Avery Berkel Category: Kitchen scales Size: 853 KB Pages: 38
Languages: English
Table of contents
Open in a new tab
Berkel FX50 Benutzerhandbuch
Brand: Avery Berkel Size: 10 MB Pages: 254
Languages: German, English, Spanish, French, Italian, Dutch
Table of contents
- 11 Installing the scale safely
- 11 Cautions for using the scale safely
- 13 Cleaning the scale
- 15 Main parts
- 17 Keyboard variants
- 23 Assembling the tower variant
- 24 Levelling the scale
- 25 Charging the battery
- 25 Changing the display backlight mode
- 26 Setting the auto power off mode
- 27 Changing the battery
- 29 Key to symbols used
- 31 Switching on and setting up the scale
- 32 Weighing individual items
- 33 Weighing items of the same unit price
- 34 Weighing using known tares
- 36 Weighing using unknown tares
- 37 Using proportional tares
- 39 Multiplying a unit price
- 40 Programming direct PLUs
- 41 Weighing using direct PLUs
- 51 Instalación de la balanza de forma segura
- 51 Precauciones para utilizar la balanza de forma segura
- 53 Limpieza de la balanza
- 55 Componentes principales
- 57 Variantes de teclado
- 63 Montaje de la variante de torre
- 64 Nivelado de la balanza
- 65 Carga de la batería
- 65 Cambio del modo de iluminación de fondo de la pantalla
- 66 Ajuste del modo de desconexión automática
- 67 Cambio de la batería
- 69 Clave de los símbolos utilizados
- 71 Conexión y ajuste de la balanza
- 72 Pesaje de artículos individuales
- 73 Pesaje de artículos con el mismo precio unitario
- 74 Pesaje utilizando taras conocidas
- 76 Pesaje utilizando taras desconocidas
- 77 Utilización de taras proporcionales
- 79 Multiplicación por un precio unitario
- 80 Programación de búsquedas de precio directas
- 81 Pesaje utilizando búsquedas de precio directas
- 93 Installation sans danger
- 93 Précautions d'utilisation de la balance en toute sécurité
- 95 Nettoyage de la balance
- 97 Éléments principaux
- 99 Claviers
- 105 Assemblage de la version avec colonne
- 106 Mise à niveau de la balance
- 107 Chargement de la batterie
- 107 Changement du mode de rétro éclairage de l'affichage
- 108 Configuration du mode d'arrêt automatique
- 109 Remplacement de la batterie
- 111 Légende des symboles utilisés
- 113 Mise sous tension et configuration de la balance
- 114 Pesage d'articles individuels
- 115 Pesage d'articles ayant le même prix unitaire
- 116 Pesage avec des tares connues
- 118 Pesage avec des tares inconnues
- 119 Utilisation des tares proportionnelles
- 121 Multiplication d'un prix unitaire
- 122 Programmation des PLU directs
- 123 Pesage avec les PLU indirects