Axis F41
Инструкции и руководства для Axis F41. Мы нашли 8 инструкции доступные для бесплатного скачивания User manual, installation Guide, Installation manual
Below you will find brief information for Main Unit F41. The F41 is a network camera that can be used to monitor a variety of locations, such as homes, businesses, and public spaces. It features a high-resolution sensor, a wide field of view, and a variety of recording and streaming options, making it a versatile security tool for a range of applications.
Ключевые особенности
High-resolution sensor
Wide field of view
Variety of recording and streaming options
H.264 and Motion JPEG video streams
Audio streams
Power over Ethernet
SD card slot
I/O connector
RS232 connector
Output buttons for controlling external devices
Страниц: 62 Axis F41 User manual
Бренд: Axis Категория: Security device components Размер: 1 MB
Языки: English
Оглавление
Открыть мануалДругие мануалы и документы
Часто задаваемые вопросы
What kind of network cable should I use with the F41?
The F41 should be connected using a shielded network cable (STP).
How do I reset the F41 to factory default settings?
To reset the F41 to factory default settings, press and hold the control button for about 10 seconds until the Status LED flashes green.
How do I access the F41 from the internet?
You must configure your network router to allow incoming data traffic to the F41. To do this, enable the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the product. This is enabled from Setup > System Options > Network > TCP/IP Advanced. For more information, see NAT traversal (port mapping) for IPv4 on page 47. See also AXIS Internet Dynamic DNS Service at www.axiscam.net
реклама