Baldor AC Water Cooled Mine Motors

Manuals and User Guides for Baldor AC Water Cooled Mine Motors. We found 1 manuals for free downloads Manual

Below you will find brief information for AC Water Cooled Mine Motors. This manual contains general procedures that apply to Baldor Motor products. For your protection, do not install, operate or attempt to perform maintenance procedures until you understand the Warning and Caution statements. This equipment contains high voltage! Electrical shock can cause serious or fatal injury. Only qualified personnel should attempt installation, operation and maintenance of electrical equipment. Be sure that you are completely familiar with MSHA (Mine Safety and Health Administration), safety standards for selection, installation and use of electric motors and generators and local codes and practices. This is an Installation & Operating Manual for Baldor Water Cooled Mine Motors. The document explains the safety regulations, precautions, installation and operation of the motors for mining applications.

Key Features

  • Water-cooled design
  • Designed for mining applications
  • Compliant with safety regulations
  • Detailed installation instructions
  • Thorough operating procedures
  • Comprehensive maintenance guidelines

Pages: 26 Baldor AC Water Cooled Mine Motors Manual

Brand: Baldor Category: Industrial & lab equipment Size: 1 MB

Languages: English

Open manual

Frequently Answers and Questions

What are the safety precautions I need to be aware of when working with these motors?
The motors contain high voltage and should only be handled by qualified personnel. Follow all relevant safety regulations, MSHA standards, and local codes and practices for safe installation, operation, and maintenance.
How do I properly ground the motor?
The motor must be properly grounded to earth before operation. The earthing connection cable or facility is located near the motor power terminals. Make sure the earthing connection is securely tightened.
What are the recommended storage requirements for these motors?
Store the motors in a clean, dry, protected warehouse with controlled temperature and humidity. Ideally, 10°C to 49°C and relative humidity not exceeding 60%. Rotate the shaft manually every 3 months and grease every 6 months.

advertisement