1. manualzz.com
  2. computers & electronics
  3. networking

Baldor MicroFlex e100 MFE230A003

Инструкции и руководства для Baldor MicroFlex e100 MFE230A003. Мы нашли 1 инструкции доступные для бесплатного скачивания Installation manual

Below you will find brief information for Servo Drive MicroFlex e100 MFE230A003, Servo Drive MicroFlex e100 MFE230A006, Servo Drive MicroFlex e100 MFE230A009. The MicroFlex e100 servo drive is a powerful and flexible motion control solution for rotary and linear motors. It features single axis AC brushless drive, auto-tuning wizard, universal feedback interface, and communication via CANopen, ETHERNET Powerlink, and TCP/IP.

Ключевые особенности

  • Single axis AC brushless drive
  • Auto-tuning wizard
  • Universal feedback interface
  • Communication via CANopen
  • Communication via ETHERNET Powerlink
  • Communication via TCP/IP
  • Position, velocity and current control
  • 3 optically isolated general purpose digital inputs
  • 1 optically isolated drive enable input
  • 1 optically isolated general purpose digital output

Страниц: 138 Baldor MicroFlex e100 MFE230A003 Installation manual

Бренд: Baldor Категория: Networking Размер: 1 MB

Языки: English

Открыть мануал

Часто задаваемые вопросы

What are the different models of MicroFlex e100 available?
The MicroFlex e100 is available in 3A, 6A, and 9A current ratings. The catalog number designates the current rating.
What types of feedback interfaces does the MicroFlex e100 support?
The MicroFlex e100 supports incremental encoder, SSI, EnDat, and SinCos feedback interfaces.
How do I connect the MicroFlex e100 to a PC?
The MicroFlex e100 can be connected to a PC using a USB cable or Ethernet adapter. The Ethernet configuration used by a normal office PC is not suitable for direct communication with the MicroFlex e100. It is recommended to install a separate dedicated Ethernet adapter in the PC, which can be configured for use with the MicroFlex e100.
What is the cooling requirement for the MicroFlex e100?
The 3A model of the MicroFlex e100 can operate without any additional cooling. The 6A and 9A models require forced air flow passing vertically from the bottom to the top of the MicroFlex e100 case to allow full rated current at 45°C (113°F). It is recommended to check periodically the operation of the cooling equipment.
What are the dimensions of the MicroFlex e100?
The MicroFlex e100 has a depth of 157 mm (6.2 in). The weight varies by model: 3A: 1.45kg (3.2lb), 6A: 1.50kg (3.3lb), 9A: 1.55kg (3.4lb)
Where should I locate the MicroFlex e100?
The MicroFlex e100 should be installed indoors, permanently fixed, and located so that it can only be accessed by service personnel using tools. Avoid locating the MicroFlex e100 immediately above or beside heat generating equipment or directly below water or steam pipes. Also, avoid locating the MicroFlex e100 in the vicinity of corrosive substances or vapors, metal particles, and dust.

реклама