Black Box IC720A
Manuals and User Guides for Black Box IC720A. We found 1 manuals for free downloads User manual
The Black Box IC720A Interface Converter connects two data communications products: one has a V.24 interface and the other has a V.35 interface. The converter is used in synchronous applications and operates at data rates up to 64 kbps. It converts the physical as well as the electrical interfaces. Its circuitry converts the interface within short range – use the converter to connect devices located close to each other (less than 6.5 feet [2 m] apart).
Key Features
Connects V.24 and V.35 devices
Operates at speeds up to 64 kbps
Transparent to protocol
Switch-selectable for DTE/DCE
Compact and lightweight
Works without AC power
Quick and easy install
Pages: 17 Black Box IC720A User manual
Brand: Black Box Category: Network media converters Size: 478 KB
Open manualFrequently Answers and Questions
What is the maximum distance the converter can be used?
The maximum distance is 6.5 feet (2 m).
What is the speed of the converter?
The speed is up to 64 kbps.
How do I configure the cable for V.35 DTE/V.24 DCE?
Locate the RS-232 connector on the cable. Remove the cover of the connector. Locate the 40-pin DTE/DCE socket on the connector circuit board. Remove the DTE/DCE socket. Turn the socket around and replace it so that the DCE side (labeled on the socket) faces the V.24 connector of the cable and the DTE faces the V.35 device. Make sure that the pins are aligned with the socket. To close the unit, press the two plastic covers together.
advertisement