4231 Manuals

Black Box MT910A

Manuals and User Guides for Black Box MT910A. We found 2 manuals for free downloads User manual, Specification

Below you will find brief information for T1/FT1 CSU/DSU MT910A. The MT910A is a single port T1/FT1 CSU/DSU with Ethernet Bridging that provides high-speed LAN-to-WAN connectivity. It plugs directly into the 10Base-T port of a hub or LAN switch and provides T1 or FT1 access at connection data rates of 1.544 Mbps, nx64, and nx56 (n=1 to 24 channels). It is an excellent choice for internet access as well as LAN-to-LAN services.

Key Features

Terminates T1/FT1 Circuits
10Base-T Ethernet bridge
PPP with Bridge Control Protocol
Unstructured Rates at 1.544 Mbps
D4 or ESF Framing Modes
Supports AMI or B8ZS/B7ZS Line Coding
Configuration via Software Control Port or Internal DIP Switches
Six Easy-to-Read LED Indicators
Internal or Receive Recover Clocking
Operates as a High-Speed Point-to-Point Modem

Pages: 23 Black Box MT910A User manual

Brand: Black Box Category: Power conditioning Size: 686 KB

Languages: English

Open manual

Frequently Answers and Questions

What is the factory default password for the MT910A?

The factory default password is "blackbox" (case sensitive).

How do I connect the MT910A to my terminal or computer?

Plug the 9-pin male end of the cable to your terminal or computer's DB-9 serial port and start up the terminal emulator software. Plug the miniature stereo plug into the rear of the unit. The small recessed jack on the left side of the unit is the control port jack.

What are the different line framing options available on the MT910A?

The MT910A supports ESF, D4 and UNFRAMED line formats. ESF provides FDL (Facility Data Link) for network interface performance monitoring. D4 is an older format that does not provide FDL. UNFRAMED allows for the maximum possible data rate of 1.544 Mb/s by using the framing bits for data transmission.