49 Manuals

Blackhawk USB200

Manuals and User Guides for Blackhawk USB200. We found 1 manuals for free downloads Quick start Guide

Below you will find brief information for JTAG Emulator USB200 USB200. The Blackhawk USB200 JTAG Emulator, a self-powered JTAG emulator, allows for debugging and programming of TI DSP target boards. It connects to the target board via a 20-pin JTAG connector and connects to the computer via a standard USB port. The emulator can be used with a variety of TI DSP boards and comes with a variety of pin converter adapters to be compatible with different target board pin configurations.

Key Features

Self-powered
20-pin JTAG connector
USB connection
Pin converters included
Compatible with TI DSP boards
Code Composer Studio v5.3 or later required

Blackhawk USB200 JTAG Emulator Quick Start Guide

Pages: 2 Blackhawk USB200 Quick start Guide

Brand: Blackhawk Category: Interface cards/adapters Size: 582 KB

Languages: English

Open manual

Frequently Answers and Questions

What software is required to use the Blackhawk USB200 JTAG Emulator?

Code Composer Studio v5.3 or later is required to use the Blackhawk USB200 JTAG Emulator.

What operating systems are supported?

The Blackhawk USB200 JTAG Emulator is supported on Windows XP/Vista/7/8 and Linux operating systems (32 or 64-bit versions).

How do I install the drivers for the emulator?

The drivers for the Blackhawk USB200 JTAG Emulator are installed as part of Code Composer Studio v5.3 or later. You will need to install Code Composer Studio first before connecting the emulator to the computer.

What is the purpose of the pin converters?

The pin converters included with the Blackhawk USB200 JTAG Emulator allow the emulator to be connected to different target boards with different pin configurations.

What if I am using Code Composer Studio v5.2?

You must update the TI Emulation package to the latest version for XDS200 support (Help->Check for Updates).