Brifen TL-4
Manuals and User Guides for Brifen TL-4. We found 2 manuals for free downloads Manual
Below you will find brief information for Wire Rope Safety Barrier TL-4. The Brifen TL-4 WRSB consists of four tensioned galvanised steel wire ropes with an average height above ground level of 705mm. Galvanised or white powder coated steel posts support the wire ropes. The rope arrangement for the Brifen TL-4 WRSB has three interwoven ropes along the fence between each post and one straight rope in the notch in the top of each post. The ropes are joined and tensioned by means of rigging screws provided at intervals not exceeding 308 metres. The ends of the ropes are attached to anchors embedded in the ground. The connection between the ropes and anchors are designed to be a gating action which allows the ropes to uncouple when a vehicle impact occurs in the vicinity of the anchor. A safety check rope then restrains the movement of the ropes.
Key Features
- High tension cable barrier
- Interwoven rope construction
- Contains and redirects errant vehicles
- Absorbs impact energy
- Minimizes injury to passengers
- Minimizes damage to vehicles
- Designed and tested to NCHRP 350
- Tested with 820kg, 2000kg and 8000kg vehicles
- Tested at speeds up to 100kph
- Tested with side on entry angles up to 25 degrees
Pages: 56 Brifen TL-4 Manual
Brand: Brifen Category: Electrical equipment & supplies Size: 5 MB
Languages: English
Open manualOther manuals and documents
Frequently Answers and Questions
What is the minimum length of the TL-4 system?
What is the recommended post spacing for the TL-4 system?
What is the standard dimension for the concrete anchor foundation for the TL-3 tested 4 rope terminal?
What is the standard dimension for the concrete post foundation?
advertisement