Burk 8681
Manuals and User Guides for Burk 8681. We found 1 manuals for free downloads Instructions
Pages: 60 Burk 8681 Instructions
Brand: Burk Category: Networking Size: 12 MB
Languages: English
Table of contents
- 6 OPERATING INSTRUCTIONS
- 7 BASIC SAFETY INSTRUCTIONS
- 9 GENERAL INFORMATION
- 9 Conformity / Standards
- 9 Approvals
- 10 QUICKSTART FOR INITIAL START-UP
- 11 CHANGES CONCERNING BÜS/CAN OPEN DESIGN
- 11 “Autotune functions” – with reference to the Basic OI for Type
- 11 “Setting colour combinations” – with reference to the Basic OI for Type
- 13 5.2.1 Device-specific LED mode “8681 Classic Mode
- 13 5.2.2 NAMUR mode
- 14 5.2.3 Valve mode
- 15 5.2.4 Valve mode + Errors
- 15 5.2.5 Valve mode + Errors + Warnings
- 16 5.2.6 Display mode “Fixed colour
- 17 “Blinking pattern & fault signalling” – with reference to the Basic OI for Type
- 17 5.3.1 Position feedback in normal operation
- 17 5.3.2 Feedback in case of Errors / Warnings
- 19 5.3.3 Localisation function
- 20 “Signal priorities” – with reference to the Basic OI for Type
- 20 5.4.1 When several states overlap for one valve
- 21 5.4.2 When position feedback overlaps
- 23 “Display of the status LEDs for bus error” – with reference to the Basic OI for Type
- 24 Further help
- 24 5.6.1 Links to different operating instructions
- 24 5.6.2 Firmware updates
- 25 BÜS/CAN OPEN-DESIGN
- 25 Definition
- 25 Network principle / Interfaces
- 26 Gateway
- 26 Electrical connection options
- 27 büS/CANopen specification
- 27 6.5.1 General data
- 27 6.5.2 Total line length and drop line lengths of the bus cables
- 28 Electrical data of the control head
- 29 Safety position if the bus fails
- 29 Design aid
- 30 Installation – Safety instructions
- 30 Gateway installation
- 30 Electrical installation - büS/CANopen
- 31 6.11.1 Electronic module büS/CANopen
- 31 6.11.2 Terminal strip configuration
- 32 6.11.3 Details on the DIP switches for colour coding
- 32 CANopen system
- 33 Configuring the Node ID / baud rate
- 33 6.13.1 Setting the baud rate
- 34 6.13.2 Setting the büS/CANopen address (Node ID)
- 36 6.13.3 Factory settings of the control head regarding the gateway configuration
- 37 6.13.4 Central configuration management (Configuration client)
- 37 Changing the gateway IP address
- 37 6.14.1 Changing the gateway IP address using web server
- 39 6.14.2 Changing the gateway IP address using “Bürkert Communicator
- 40 6.14.3 Changing the gateway IP address via Logix Designer
- 43 6.14.4 Changing the gateway IP address using RS Linx
- 44 Registration of a gateway via Logix Designer
- 45 Installation of a gateway via Logix Designer
- 47 Configuration of the control head network
- 47 6.17.1 “Hide function” via software “Logix Designer
- 48 6.17.2 “Hide function” via “Bürkert Communicator
- 50 Description of the (cyclical) I/O data
- 50 Access to parameters (Read / Write)
- 51 6.19.1 Parameter – reading via Logix Designer
- 52 6.19.2 Parameters – writing via Logix Designer
- 53 6.19.3 Access to parameters via Bürkert Communicator
- 53 6.19.4 Access to further parameters (cyclic and acyclic)
- 54 ACCESSORIES
advertisement