CERTIFIED 20V Cordless Line Grass Trimmer
Manuals and User Guides for CERTIFIED 20V Cordless Line Grass Trimmer. We found 1 manuals for free downloads Owner's manual
CERTIFIED 20V Cordless Line Grass Trimmer is a powerful and versatile tool that makes it easy to keep your lawn looking its best. With its lightweight design and adjustable cutting height, it's perfect for trimming around obstacles and edging along flower beds. The automatic line feed system ensures that you always have the right amount of line, and the safety guard helps to protect you from flying debris. An optional edger wheel lets you quickly and easily create clean, crisp edges along your lawn.
Key Features
20V lithium-ion battery for extended runtime
Adjustable cutting height for a variety of tasks
Automatic line feed system for continuous cutting
Safety guard to protect user from flying debris
Lightweight design for easy maneuvering
Optional edger wheel for creating clean, crisp edges
Pages: 28 CERTIFIED 20V Cordless Line Grass Trimmer Owner's manual
Brand: CERTIFIED Category: Grass trimmers Size: 6 MB
Languages: English
Open manualFrequently Answers and Questions
How do I adjust the cutting height?
To adjust the cutting height, simply loosen the knob on the side of the trimmer and slide the cutting head up or down to the desired height.
How do I install the edger wheel?
To install the edger wheel, simply remove the two screws that hold the trimmer head in place and slide the edger wheel onto the shaft. Tighten the screws to secure the edger wheel in place.
How do I use the automatic line feed system?
The automatic line feed system will automatically release more line as needed. Simply hold the trigger and the trimmer will do the rest.
How do I replace the cutting line?
To replace the cutting line, simply remove the spool cover and pull out the old line. Insert a new spool of line into the spool cover and pull the line through the hole in the cover. Wind the line around the spool until it is tight, then replace the spool cover.
Questions & Answers
A A A
How to fit a nylon line onto the spool?
To fit a nylon line, take approximately 10’ (3 m) of line and insert 0.59” (15 mm) of it into one of the holes in the upper section of the spool. Wind the line in the direction of the arrows on the top of the spool. Leave about 4” (10 cm) of line unwound and place it into the cleat. Ensure the line is neatly coiled to maintain the efficiency of the automatic line feed. Then, fit the spool as described in the instructions for fitting a complete spool and line.
How to replace the spool or cutting line reel?
To remove the cap, press and hold the two latches and pull the cap away from the spool holder. To fit a complete spool and line, remove the old spool, place the new spool into the cap, align the cut-out areas of the spool with the eyelets, release the line from the cleat, feed it through the eyelet, and refit the cap securely.
How to replace the spool line?
To replace the spool line, first remove the old spool. Then, place the new spool into the cap, ensuring the cut out areas of the spool are aligned with the eyelets. Release the line from the cleat and feed it through the eyelet. Finally, refit the cap.
advertisement