1. manualzz.com
  2. industrial & lab equipment
  3. electrical equipment & supplies

CM AIRSTAR

Manuals and User Guides for CM AIRSTAR. We found 2 manuals for free downloads Manual

CM AIRSTAR Air Hoists are precision built chain type hoists that are built in three rated loads, 1/4, 1/2, and 1 ton. Each size is available in pull cord control and pendant throttle control models. These hoists are completely lubricated and load tested before being shipped from the factory. To place hoist in service, attach to a suitable overhead suspension, connect hoist to nearest air supply, and check and adjust hoist speed.

Key Features

  • Chain type hoist
  • Rated loads: 1/4, 1/2, and 1 ton
  • Pull cord or pendant throttle control
  • Aluminum alloy frame
  • Vane type air motor
  • Lower block and chain operated limit stop
  • Hook or lug type suspension
  • Coil or roller chain load
  • Spark resistant models

Pages: 12 CM AIRSTAR Manual

Brand: CM Category: Electrical equipment & supplies Size: 2 MB

Languages: English

Open manual

Other manuals and documents

28 Pages

Manual

Languages: English

Frequently Answers and Questions

What are the rated loads of the CM AIRSTAR Air Hoist?
The CM AIRSTAR Air Hoist is available in three rated loads: 1/4, 1/2, and 1 ton.
What types of control are available for the CM AIRSTAR Air Hoist?
The CM AIRSTAR Air Hoist is available with pull cord control and pendant throttle control models.
What are the main components of the CM AIRSTAR Air Hoist?
The main components of the CM AIRSTAR Air Hoist include an aluminum alloy frame, a vane type air motor, a chain sprocket wheel, gearing, a shoe-type brake, a control head assembly, and an upper suspension hook or lug bracket.
How is the speed of the CM AIRSTAR Air Hoist adjusted?
The hoisting and lowering speed of the CM AIRSTAR Air Hoist can be adjusted by turning the appropriate regulator screw.
How do I lubricate the load chain on the CM AIRSTAR Air Hoist?
The load chain should be cleaned and lubricated regularly, depending on the type of chain. For alloy steel chain, weekly attention is usually sufficient, while roller chain may only require monthly attention. Always use a good grade of motor oil or penetrating oil and graphite for chain lubrication.

advertisement