3511 Manuals

Carrier X Series

Manuals and User Guides for Carrier X Series. We found 3 manuals for free downloads Manual

Below you will find brief information for Refrigeration Unit X Series. This manual provides detailed instructions on operating and servicing your refrigeration unit. It includes information on starting, stopping, temperature control, and maintenance procedures. The manual also includes troubleshooting tips for common problems, as well as a detailed guide to the unit's electrical system.

Key Features

Advance Microprocessor
Multiple Languages
Sleep Mode
Defrost
Cargo Protect Mode
IntelliSet
DataTrak
Two-Way Remote Communication
AutoFresh Air Exchange
PreTrip Inspection

Refrigeration Unit X Series Operation and Service Manual

Pages: 321 Carrier X Series Manual

Brand: Carrier Category: Motor vehicle accessories & components Size: 9 MB

Languages: English

Open manual

Frequently Answers and Questions

What is the purpose of the Advance Microprocessor?

The Advance Microprocessor controls all aspects of the refrigeration unit's operation, including temperature control, defrosting, and engine management.

How do I change the setpoint temperature?

You can change the setpoint temperature using the unit's keypad or by using the IntelliSet option.

What is the Sleep Mode and how does it work?

The Sleep Mode is a feature that allows the unit to conserve energy when it is not in use. It can be activated by setting the thermostat to a certain temperature or by using the remote switch.

How do I perform a pre-trip inspection?

The pre-trip inspection involves checking the engine oil level, coolant level, fuel level, and battery voltage. It is important to perform this inspection before each trip to ensure that the unit is operating safely.

How do I adjust the V-belts?

The V-belts should be adjusted to the proper tension to prevent slippage and premature wear. Use a tension gauge to check the belt tension and adjust as needed.

Questions & Answers

2024-08-05

E E W

What causes alarm code 2000 on a Carrier X2 APX unit?

Alarm code 2000 usually indicates a problem with the compressor discharge temperature sensor. This could be due to a faulty sensor, a loose connection, or compressor overheating. Check the sensor; if the compressor is overheating, contact a qualified technician.

2024-11-03

N N M

How to reset technician mode?

To reset technician mode, use the Configuration Mode in the technician interface. Refer to Paragraph 5.2.1, "Configuration Mode" for instructions.