1. manualzz.com
  2. vehicles & accessories

Chevrolet Performance SB/BB 19329635

Manuals and User Guides for Chevrolet Performance SB/BB 19329635. We found 1 manuals for free downloads installation Guide

Below you will find brief information for Clutch Kit SB/BB 19329635, Clutch Kit SB/BB 19331079 and Clutch Kit SB/BB 19331082. The document describes the installation procedure of a Chevrolet Performance Clutch Kit. It includes instructions for installing the flywheel, bottom disc, floater plate, top disc and cover, and also provides torque specifications for each component. This installation guide is designed to help you properly install your new Clutch kit.

Key Features

  • Flywheel installation
  • Bottom disc installation
  • Floater plate installation
  • Top disc installation
  • Cover installation
  • Alignment tool use
  • Stand nut torque

Pages: 6 Chevrolet Performance SB/BB 19329635 installation Guide

Brand: Chevrolet Performance Category: Vehicles & accessories Size: 330 KB

Languages: English, Spanish, French

Open manual

Frequently Answers and Questions

What should I check before installing the clutch kit?
It's important to inspect the new clutch parts, slide the discs onto the input shaft of the transmission and check for proper fit. Remove any burrs that may exist on the spline. Ensure that all of the components listed in the Package Contents section were shipped in the kit.
What are some important things to remember when installing the transmission?
Don't leave the transmission unsupported in the clutch disc splines. Use a transmission jack to avoid bending the disc carriers. NEVER use the transmission bolts to pull the transmission up to the engine.
When do I need to replace the engine flywheel?
The engine flywheel must also be replaced along with the clutch pressure plate as an assembly when the clutch driven plates require replacement.
What if the transmission doesn't slide into place?
If the transmission will not slide into place, the discs are not properly aligned. Unbolt the clutch cover, re-center the discs, and retry the installation. Failure to do so will result in a bent discs, causing chatter or non-release.

advertisement