Cirrus CR99

Manuals and User Guides for Cirrus CR99. We found 3 manuals for free downloads instruction manual, Owner's manual

Below you will find brief information for vacuum cleaner CR69A, vacuum cleaner CR79, vacuum cleaner CR99. These vacuum cleaners offer a variety of features, including a full bag indicator light, variable power control, and a self-adjusting carpet nozzle. They are designed to provide high performance floor and carpet cleaning for years to come. Use the attachments included to extend the cleaning power to your furniture, drapery, walls and window blinds.

Key Features

  • Full Bag Indicator Light
  • Variable Power Control
  • Self-adjusting Carpet Nozzle
  • On-board Cleaning Tools
  • Headlight
  • Automatic Agitator Brush Stop Rotation
  • Check Bag Indicator Light
  • Carpet/Floor Selector
  • Electrostatic Filter System
  • HEPA Type Filter System

Pages: 20 Cirrus CR99 instruction manual

Brand: Cirrus Category: Vacuum cleaners Size: 1 MB

Languages: English

Open manual

Other manuals and documents

21 Pages

instruction manual

Languages: English

5 Pages

Owner's manual

Frequently Answers and Questions

How do I replace the dust bag?
Push down on the knob at the top of the dust cover to open the compartment. Pull the cardboard bag collar off the holder. Remove and discard the used dust bag. Slide a clean replacement bag collar onto the holder. Close the dust cover by reinserting the tab on the lower edge into the groove on the housing and snap shut.
How do I clean the nozzle?
Unplug the power cord. Open the lid on the cleaning attachment opening, and remove any clog or blockage. If the hose is still blocked, remove the hose cuff from the nozzle inlet. Turn the unit over, remove the bottom plate, check the nozzle inlet tube for obstructions. When clear, reinstall the bottom plate.
How do I reset the thermal switch?
Set the power switch on the handle to the off position. Unplug the power cord. Wait about 10 minutes to let the motor cool down. Push the reset button lightly to the stop position. Plug in the power cord. Set the power switch to the on position.

advertisement