Code 3 LSS 265
Manuals and User Guides for Code 3 LSS 265. We found 1 manuals for free downloads Installation and Operation Manual
Below you will find brief information for warning light beacon LSS265. The LSS265 is a weatherproof beacon with 16 LEDs in 2 stacked rows and has a unique reflector design to capture light from the LEDs and project it through the lens. The beacon is available in both magnetic and permanent mount options. It can be synced with other beacons to create synchronized flashing patterns.
Key Features
Weatherproof
16 High Intensity LEDs
Dual Stacked Rows
Unique Reflector Design
Magnetic and Permanent Mount
Synchronization Capability
Pages: 8 Code 3 LSS 265 Installation and Operation Manual
Brand: Code 3 Category: Sirens Size: 488 KB
Languages: English
Table of contents
Open manualFrequently Answers and Questions
What is the operating voltage of the LSS265?
The LSS265 operates on a DC voltage of 10V-30V.
What are the different flash patterns available for the LSS265?
The LSS265 offers several flash patterns, including single-flash, double-flash, and rotator-flash.
How do I synchronize the LSS265 with other beacons?
To synchronize two beacons, configure both to display the same Phase 1 pattern. Then connect the YELLOW wires from each light together. When the lights are activated, their patterns will be synchronized.
What are the installation options for the LSS265?
The LSS265 provides both magnetic and permanent mounting options. The magnetic mount is temporary, while the permanent mount provides a secure, fixed installation.
How do I set the flash pattern on the LSS265?
For magnetic base: Depress the rocker switch on the lighter plug. Less than 1 second for NEXT, 1 to 3 seconds for PREVIOUS, 3 to 5 seconds for DEFAULT, and greater than 5 seconds for OFF. For permanent base: Connect the blue wire to the black wire (chassis ground). Less than 1 second for NEXT, 1 to 3 seconds for PREVIOUS, 3 to 5 seconds for DEFAULT, and greater than 5 seconds for OFF.
advertisement