1. manualzz.com
  2. home
  3. home security & automation

Codelocks UK CL1000

Manuals and User Guides for Codelocks UK CL1000. We found 2 manuals for free downloads Operating instructions

Below you will find brief information for cabinet lock CL1000 CL1000. The CL1000 Cabinet Lock is a versatile, electronic locking solution designed for various applications. It features a 10-button keypad and a # button that allows users to access the lock with a code. The lock has three code levels: Master, Sub-Master and User, each with a specific set of functionalities. You can set the lock to operate in either 'Repeated Use' or 'Single Use' mode, depending on your needs. The lock also integrates a low battery indicator and a battery failure override mechanism, ensuring secure access even in low-power conditions. This document outlines the detailed programming and operating instructions for this device.

Key Features

  • Three code levels: Master, Sub-Master, and User
  • Repeated Use and Single Use modes
  • 10-button keypad and # button
  • Low battery indicator
  • Battery failure override
  • Factory preset codes
  • Ability to change codes
  • Lost code procedure
  • Tamper timeout
  • Long battery life

Pages: 2 Codelocks UK CL1000 Operating instructions

Brand: Codelocks UK Category: Home security & automation Size: 196 KB

Languages: English

Open manual

Other manuals and documents

2 Pages

Operating instructions

Languages: Bulgarian

Frequently Answers and Questions

How do I change the Master Code?
To change the Master Code, press the # button, followed by the Master Code, then 01, then enter the new Master Code twice, and press the # button twice.
What happens if I enter the wrong code three times in a row?
If you enter the wrong code three times in a row, the lock will shut down for 10 seconds.
How do I reset the lock to factory settings?
To reset the lock to factory settings, remove one battery, press and hold the 1 button, replace the battery, and then press the 1 button three times within three seconds. This will restore the factory Master Code (11 33 55 77) and erase all stored settings.
What happens when the battery is low?
When the battery is low, the Red LED will flash three times before the Blue LED flashes to signal acceptance of the code. You should replace the batteries as soon as possible. The lock will operate for 100 times with low battery.
How can I open the lock if the batteries are dead?
In case of battery failure, you can use an external PP3 battery placed against the contact points surrounding the Blue and Red LEDs. Connect the positive terminal of the PP3 battery to the RED LED contact point and the negative terminal to the Blue LED contact point. Enter the Master Code, and the motor will withdraw the locking pin, allowing you to open the lock.

advertisement