CommScope 1933352 -1
Manuals and User Guides for CommScope 1933352 -1. We found 1 manuals for free downloads Instructions
Below you will find brief information for cable manager 1933352-1. The 1933352-1 cable manager is designed to provide strain relief, support, and distribution of cables. This manager can support loads associated with large diameter cables and is capable of being mounted onto a standard 483 mm (19 in.) EIA rack or equipment cabinet.
Key Features
Provides strain relief, support, and distribution of cables
Supports loads associated with large diameter cables
Designed to be mounted onto a standard 483–mm [19–in.] EIA rack or equipment cabinet
Includes bracket, tie down bar, 2 thumb screws, and 4 mounting screws
Tie down bar and brackets have slots for securing cable
Can be mounted to the back or front of the rack
Can be mounted horizontally or vertically
Maximum total load of 9 kg (20 lbs)
Pages: 2 CommScope 1933352 -1 Instructions
Brand: CommScope Category: Patch panels Size: 1 MB
Languages: English
Open manualFrequently Answers and Questions
How do I mount the cable manager to the back of the rack?
Align each bracket with the back of the rack so that the short leg faces out. Secure the brackets with the mounting screws included with the cable manager. Refer to Figure 2, Detail A.
How do I mount the cable manager to the front of the rack?
Align each bracket with the front of the rack so that the short leg faces out. Secure the brackets and the patch panel with the mounting screws included with the patch panel. Refer to Figure 2, Detail B.
How do I secure the cables to the cable manager?
Using a cable tie or hook-and-loop cable tie (both made of nylon), or similar cable fasteners, secure the cable to the tie down bar and/or the brackets. The cable can be secured over or under the tie down bar and to the inside or outside of the brackets. Distribute the cables evenly. See Figure 4. DO NOT exceed the maximum total load of 9 kg (20 lbs).
advertisement