Compaq Netelligent 2008/2016
Manuals and User Guides for Compaq Netelligent 2008/2016. We found 1 manuals for free downloads User Guide
Below you will find brief information for 10Base-T repeater Netelligent 2008/2016. The Compaq Netelligent 2008/2016 10Base-T repeater is the ideal connectivity solution for departmental Ethernet networks that contain 8 to 160 nodes. The repeater is available in a 16-port model and an 8-port model. The repeater is easy to configure, maintain, and expand. Each repeater is pre-configured with management capability and is fully manageable under SNMP management systems, such as Compaq Netelligent Management Software.
Key Features
Supports up to 160 nodes
Easy to configure and maintain
Manageable under SNMP
Preconfigured with management
Supports uplink switch
Supports RJ-45 ports
Supports Alternate Media Connectors
Supports repeater expansion ports
Supports serial port
Supports out-of-band management and firmware upgrades
Pages: 105 Compaq Netelligent 2008/2016 User Guide
Brand: Compaq Category: Bridges & repeaters Size: 652 KB
Languages: English
Table of contents
Open manualFrequently Answers and Questions
What are the minimum specifications and requirements for twisted-pair wiring used to connect the repeater's RJ-45 ports?
The wiring must be shielded or unshielded twisted-pair (STP/UTP), Category 5. Two pairs of wiring are required, with a wire gauge between 18 and 26 AWG. UTP wire should meet specific requirements including solid copper, nominal capacitance less than 16 pF/ft, nominal impedance of 100 Ohms, and nominal attenuation less than 11.5 db.
How many repeaters can be interconnected in a single stack?
You can interconnect up to ten repeaters in one stack. If there is not enough space to mount the repeaters in a single rack or stack them on a single shelf, or if you want to place the repeaters in different locations, you can place them side by side on separate shelves or in separate racks. If this is necessary, you will need longer repeater expansion port cables to connect the repeaters.
What are the different Alternate Media Connectors that can be installed in the repeater's Media Expansion Port?
The 10Base-T repeater has a Media Expansion Port (MEP) that lets you install one of the following three optional Alternate Media Connectors (AMCs, sold separately): BNC for connecting to a Thinnet backbone, AUI for connecting to a Thicknet backbone, and Fiber for connecting to a 10Base-FL backbone.
advertisement