Crossfire P110D

Crossfire P110D, a high-performance 10-inch subwoofer, delivers exceptional bass with its robust construction and advanced engineering. Explore the technical specifications and instruction manual to optimize your audio experience: 1. **Power Ratings:** - Nominal Power Handling: 200 watts per coil, ensuring minimal mechanical degradation over time when used within recommended enclosures. - Maximum Power Handling (PE): 350 watts per coil, indicating the limit beyond which extended use may cause mechanical stress and potential failure. - Dynamic Power Handling: 800 watts per coil, representing the peak power capacity for short bursts and transients. Continuous use at or above this level can lead to mechanical or thermal failure. 2. **Enclosure Recommendations:** - **Sealed Enclosure:** - Optimum Volume: 0.65 cubic feet (18.41 liters) - Enclosure "Q": 0.78 - -3dB Response: 42Hz - Maximum Power Handling: 350 watts - **Vented Enclosure:** - Optimum Volume: 1.1 cubic feet (31.15 liters) - Tuning Frequency: 29Hz - Port Dimensions: 3" diameter x 18" length - -3dB Response: 29Hz - Maximum Power Handling: 275 watts - **Bandpass Enclosure:** - Front Volume: 0.8 cubic feet (22.65 liters) - Rear Volume: 0.5 cubic feet (14.16 liters) - Tuning Frequency: 60Hz - Port Dimensions: 4" diameter x 8.35" length - -3dB Response: 41 - 81Hz - Maximum Power Handling: 350 watts 3. **Damping Material:** - Recommended materials include Dacron, Polyfill, and reclaimed fiber underlay. - Fiberglass usage is limited to sealed enclosures only due to potential health hazards when fibers escape through ports. 4. **Specifications:** - Driver Description: 10-inch Subwoofer, Dual Voice Coil - Mounting Depth: 5.31 inches (135 mm) - Cutout Dimensions: 9.02 inches (229 mm) - Impedance: 4 ohms per coil - Frequency Response: 22Hz to 250Hz - Resonance Frequency (fs): 22.6Hz - Efficiency: 86dB (2.83V/1M)