Cyberoam FIREWALL

Manuali e guide per l''utente per Cyberoam FIREWALL. Abbiamo trovato 2 manuali per download gratuiti User Guide, User manual

Below you will find brief information for Cyberoam Appliance. This guide provides step-by-step instructions for deploying the Cyberoam appliance in Gateway mode, replacing an existing firewall. It covers features supported, deployment steps, configuration verification, and advanced settings. The guide assumes a factory default setting and helps you set up the appliance as a gateway for your network, adding security through deep-packet inspection, intrusion prevention, and anti-virus/spam protection.

Caratteristiche principali

  • Gateway Mode Deployment

  • Deep Packet Inspection

  • Intrusion Detection/Prevention

  • Gateway Anti-Virus

  • Gateway Anti-Spam

  • VLAN Support

  • High Availability Support

Altri manuali e documenti

8 pagine

User manual

Lingue: English

Risposte e domande frequenti

What are the two deployment modes for the Cyberoam appliance?

Gateway mode (Route mode) and Bridge mode (Transparent mode).

What features are supported in Gateway mode?

All features except Hardware bypass (LAN bypass).

What is the default LAN IP address for the Cyberoam appliance?

172.16.16.16/255.255.255.0

How do I access the Cyberoam Web Console?

Browse to https://172.16.16.16 (default IP) using default username and password.

What are the pre-defined Internet Access Policies?

Monitor Only, General Internet, and Strict Internet.

annuncio pubblicitario