D-Link DCS-5000L
Manuals and User Guides for D-Link DCS-5000L. We found 6 manuals for free downloads User manual, Setup Procedure, Quick Installation Guide, User Guide
D-Link DCS-5000L is a Pan & Tilt Wi-Fi Day/Night Camera that allows you to keep an eye on your home or office from anywhere with your smartphone, tablet, or computer. With its 110-degree field of view, the DCS-5000L can capture a wide area, and its pan and tilt capabilities allow you to remotely adjust the camera's angle to get a better view of what's happening. The DCS-5000L also features night vision, so you can see what's going on even in low-light conditions. And with motion detection and sound detection, you'll be notified if anything happens while you're away.
Key Features
Indoor IP security camera
CMOS 25.4 / 5 mm (1 / 5") 640 x 480 pixels
Wired & Wireless Ethernet LAN Wi-Fi
Night vision 8 m IR
Digital zoom: 4x
Black, White
292.8 g
Pages: 78 D-Link DCS-5000L User manual
Brand: D-Link Category: Webcams Size: 4 MB
Languages: English
Table of contents
Open manualOther manuals and documents
Frequently Answers and Questions
How do I set up the DCS-5000L?
You can set up the DCS-5000L using the mydlink Lite app on your smartphone or tablet. The app will guide you through the setup process and help you connect the camera to your Wi-Fi network.
Can I use the DCS-5000L outdoors?
No, the DCS-5000L is not weatherproof and should not be used outdoors.
Can I record video with the DCS-5000L?
No, the DCS-5000L does not have a built-in recording feature.
Questions & Answers
Z Z A
What is the function of the light sensor?
The light sensor monitors lighting conditions and switches between color and infrared modes accordingly.
What is the purpose of the camera lens?
The camera lens is used to record videos of the surrounding area.
W W Z
Power LED is off, infrared LED is always on, and there is no Wi-Fi connection.
The provided manual does not offer troubleshooting for this specific issue. However, you may want to check the power adapter, Ethernet cable (if applicable), and attempt a hard reset. If the problem persists, a hardware issue is suspected.
The power LED only illuminates when the infrared connector is disconnected.
This suggests a potential hardware problem, such as a short circuit in the infrared component. Repair or replacement may be necessary.
D D C
How is the DCS-5000L camera connected wirelessly?
The camera can be connected wirelessly using the WPS (Wi-Fi Protected Setup) function. Press and hold the WPS button on the camera for three seconds, then press the WPS button on the wireless router or access point within 60 seconds. Alternatively, setup can be done using the mydlink Lite application.
advertisement