8675 Manuals

D-Link NetDefend DFL-800

Manuals and User Guides for D-Link NetDefend DFL-800. We found 9 manuals for free downloads Quick Installation Guide, Manual, User manual, Data Sheet, quick guide, User Guide

Below you will find brief information for Network Security Firewall NetDefend DFL-800. The NetDefend DFL-800 allows users to connect their home network to the internet via a DSL or cable modem. It also features an built-in DHCP server for automatic IP address assignment to connected devices, making it easy to set up and configure. The DFL-800 also has a user-friendly Web-based setup wizard that walks users through the initial configuration process, ensuring an easy and smooth setup experience.

Key Features

Built-in DHCP Server
Web-based setup wizard
Security Firewall
Supports DSL or cable modem connection
DMZ Ports
Console Port

Pages: 21 D-Link NetDefend DFL-800 Quick Installation Guide

Brand: D-Link Category: Hardware firewalls Size: 3 MB

Languages: English

Open manual

Frequently Answers and Questions

What is the default management IP address of the DFL-800?

The default management IP address of the DFL-800 is 192.168.1.1.

How do I access the Web interface of the DFL-800?

Open a web browser, go to the address bar, and type "https://192.168.1.1". You will then be prompted to log in with the default username and password: admin/admin.

What are the different WAN interface types that the DFL-800 supports?

The DFL-800 supports Static IP, PPPoE (Point-to-Point Protocol over Ethernet), PPTP, and Big Pond.

How do I configure the network adapter on my computer to connect to the DFL-800?

You will need to configure your computer's network adapter to use a static IP address with 192.168.1.1 as the default gateway and 255.255.255.0 as the subnet mask.

What is the purpose of the DMZ port on the DFL-800?

The DMZ port allows you to connect a device to a DMZ network, which can be used to isolate a device from the rest of your network.

What is the purpose of the console port on the DFL-800?

The console port allows you to connect the DFL-800 to a computer via a RS-232 console cable. This can be used for troubleshooting or advanced configuration.

How do I change the default username and password for the DFL-800?

You can change the default username and password in the web-based interface of the DFL-800. Go to the "System" section and select "Admin Account". Here you can modify the username and password.