1. manualzz.com
  2. home
  3. home security & automation
  4. motion detectors

DSC Bravo 4 BV-400UL

Manuals and User Guides for DSC Bravo 4 BV-400UL. We found 1 manuals for free downloads Installation instructions

Below you will find brief information for motion detector Bravo4 BV-400UL, motion detector Bravo4 BV-401UL, motion detector Bravo4 BV-402UL. This document provides detailed instructions on installing and configuring the Bravo4 motion detector, including mounting, wiring and setting up the detection zones. You’ll also find technical details about the device’s performance and its features such as temperature compensation, energy analysis, and dual channel signal processing. This is an excellent guide for understanding and using the Bravo4 motion detector for security applications in residential and commercial buildings.

Key Features

  • Quad element low noise sensor
  • Four interchangeable lenses
  • High level static protection
  • High level transient protection
  • High level white light immunity
  • Temperature compensation
  • Energy analysis circuit
  • Dual channel processing
  • Vertical adjustment
  • Wall / corner mounting

Pages: 2 DSC Bravo 4 BV-400UL Installation instructions

Brand: DSC Category: Motion detectors Size: 78 KB

Languages: English

Open manual

Frequently Answers and Questions

How to change lenses on Bravo4 motion detector?
To change the lens, release the top tab and pull the lens holder out. This action releases the lens. Insert the lens with the grooves facing inward. The bottom of the lens is indicated by two triangular indentations. Ensure that the lens is centred left to right then reinstall the lens holder. The lens holder will snap into place sealing the lens into position.
How to open the case of Bravo4 motion detector to access the PCB?
To open the case, use a small flat blade screwdriver and gently push in the tab at the bottom of the case and pull the cover straight out at the bottom. Loosen the PCB screw, and push the board up as far as it will go.
What is the difference between BV-400UL, BV-401UL and BV-402UL models of Bravo4 motion detector?
The BV-400UL model has a Form A alarm contact. The BV-401UL model has a Form A alarm contact and tamper switch. The BV-402UL model has a Form C alarm contact and tamper switch.
Does the Bravo4 motion detector have a built-in LED indicator?
Yes, the Bravo4 motion detector has an alarm LED indicator. The LED can either be enabled or disabled using the J1 jumper. If jumper J1 is ON, the LED will operate on alarm. If jumper J1 is set to OFF, the LED will not operate on alarm, therefore, eliminating any undesired light.
What is the recommended mounting height for the Bravo4 motion detector?
The recommended mounting height for the Bravo4 motion detector is 7.5 feet (2.3 meters). However, the actual mounting height may vary depending on the lens used and the desired coverage area. The mounting height chart provides specific recommendations for each lens type.

advertisement