DSC MD12
Manuales y guías de usuario para DSC MD12. Encontramos 2 manuales para descargas gratuitas Installation instructions
Below you will find brief information for MD12. This DSC Communicator is a communication device engineered to link computer terminals via an RS232 port to DSC downloadable security systems using telephone lines. It supports Bell 103-300 and 110 baud data communication standards, primarily using the Hayes command set, offering a reliable interface for remote security system management.
Características clave
Enables communication between computer terminals and DSC security systems via RS232 port
Communicates over standard telephone lines
Compatible with Bell 103-300 and 110 baud data communication standards
Supports Hayes command set as a template
LED indicators for Power, Transmitted Data (TX), and Received Data (RX)
Supports Touch Tone (DTMF) and Pulse dialing options
Automatic disconnection of optional telephone during communication
Baud Rates: 110, 300, and 1200 bps
Power Requirements: 12 VAC, 150mA
páginas: 2 DSC MD12 Installation instructions
Marca: DSC Tamaño: 31 KB
Idiomas: English
Abrir manualOtros manuales y documentos
Frequently Answers and Questions
What is the DSC Communicator?
The DSC Communicator is a communication device designed to enable computer terminals—through use of an RS232 port—to communicate via telephone lines with the DSC line of downloadable security systems.
What do the status lights on the communicator indicate?
The LED indicators show: Power (Red), Transmitted Data to computer (TX) (Green), and Received Data from computer (RX) (Red).
How do I connect the communicator to a computer?
Connect the 6- to 25-pin adapter to your RS232 port, then connect the 6-pin cable from the adapter to the 6-pin connector on the communicator.
What are the power requirements for the DSC Communicator?
The communicator requires 12 VAC, 150mA.
What baud rates are supported by the communicator?
The communicator supports baud rates of 110, 300, and 1200 bps.
What is the function of the JP1 jumper setting?
JP1 selects the pulse dialing option: ON for North American dialing and OFF for European dialing.
Anuncio