DSC PowerSeries
Manuals and User Guides for DSC PowerSeries. We found 7 manuals for free downloads installation Guide, User manual, Reference guide, Data Sheet
Below you will find brief information for PowerSeries PC1616, PowerSeries PC1808, PowerSeries PC1832, PowerSeries PC1864. These security systems are designed to provide protection for your home or business. This guide will help you install and configure the system, as well as provide information on the features and functions of the system. You can use the system to protect your home or business from intruders. If you are looking for a security system that offers advanced features and reliable performance, then this is a great option for your needs. You can use this document to install the system, configure settings, and troubleshoot issues.
Key Features
Hardwired and wireless zones
Multi-partition support
Central station monitoring
DLS remote programming
User code programming
Built-in telephone interface
Expandable with additional modules
UL and ULC listed (certain models)
On-board PGM outputs
Event buffer
Pages: 64 DSC PowerSeries installation Guide
Brand: DSC Category: Security access control systems Size: 743 KB
Languages: English
Table of contents
Open manualOther manuals and documents
Frequently Answers and Questions
How many zones can each model support?
The PC1616 supports 16 hardwired zones and 32 wireless zones. The PC1808 supports 8 hardwired zones and 32 wireless zones. The PC1832 supports 32 hardwired zones and 32 wireless zones, while the PC1864 supports 64 hardwired zones and 32 wireless zones.
What are the keybus wiring requirements?
The keybus uses a 4-wire connection (red, black, yellow, and green) and requires a minimum of 22 AWG wire and a maximum of 18 AWG wire. Do not use shielded wire. Total wire length from the control panel to any module should not exceed 1,000 feet (305 meters).
What types of batteries are required for these security systems?
A sealed, rechargeable, lead acid battery or gel type battery is required to meet UL requirements for power standby times. UL Residential/Commercial Burglary installations require 4 hours of power standby time, while UL/ULC Residential Fire & Health Care installations require 24 hours of standby. ULC Commercial Burglary and Fire monitoring installations also require 24 hours of standby.
What are the different arming modes available?
The system offers Away and Stay arming modes. Away mode arms all zones, while Stay mode only arms specific zones, allowing you to remain in the premises while the system is active.
Questions & Answers
F F Q
What steps should be taken if the Armed or Ready lights on the security system are not activating?
Check for trouble conditions: If a trouble condition is detected, the Trouble or System indicator will turn on. Press the # key to silence the beeps and then press *[2] to view the specific trouble condition (indicated by numbers 1-8). Test the System: Perform a system check by pressing *[6][Master Code][4] to activate all keypad lights and sounders for two seconds.
advertisement