DYNACO SCA 80Q

Connect the front speakers to the top row of terminals. The rear speakers can be connected to the bottom row for a 4-D experience or for conventional stereo in a different room. Each speaker should be connected to a black or common terminal and to the adjacent gold or five terminal. Ensure that the polarity of your connections is not reversed and that the live sides are not connected together.

The Tone Controls are "out of the circuit" when they are centered, providing the finest performance with no frequency discrimination. You can adjust them to the right for increase and to the left for decrease, to adjust for the original signal or to correct for older records that don't follow the RIAA standard.

The Monitor switch allows you to compare the source signal directly with the same signal played back from a separate tape recorder. You can hear the source directly when the switch is in the "Input" position and hear the program from the recorder when it's in the "Tape" position. Remember to keep the Monitor switch on "Input" unless you are using the tape recorder playback.

The Dynaquad system uses four speakers to create a more realistic and immersive sound experience. It incorporates a special circuitry that reproduces all of the interrelated signals, including both direct and reflected sounds, to recreate the original environment like a concert hall.

The Speakers switch lets you choose between different speaker configurations. You can select "Front" to play through only the front speakers, "Four" to connect all speakers for 4-D or separate stereo in different rooms, or "Null" to balance the 4-D system.