4727 Manuals

Daikin R410A Split Series FTX20KV1B

Manuals and User Guides for Daikin R410A Split Series FTX20KV1B. We found 2 manuals for free downloads Installation manual

Below you will find brief information for R410A Split Series FTX20KV1B, R410A Split Series FTX25KV1B, R410A Split Series FTX35KV1B, R410A Split Series FTX50KV1B. This manual provides detailed instructions on how to install your new DAIKIN split-system air conditioner. You will find information on choosing the right location for your indoor and outdoor units, connecting the refrigerant piping, completing the wiring and drain piping, and finally performing a trial operation and testing.

Key Features

R410A refrigerant
Inverter technology
Split system
Indoor and Outdoor Units
Wireless remote control
Titanium apatite photocatalytic air-purifying filter
Automatic restart
Trial operation mode
Easy to install
Detailed instructions

DAIKIN R410A Split Series FTX20KV1B, FTX25KV1B, FTX35KV1B, FTX50KV1B Installation Manual

Pages: 16 Daikin R410A Split Series FTX20KV1B Installation manual

Brand: Daikin Category: Split-system air conditioners Size: 5 MB

Languages: English

Open manual

Frequently Answers and Questions

What is the purpose of the trial operation mode?

The trial operation mode allows you to test all the functions and parts of your air conditioner before using it for the first time.

What should I do if the air conditioner is not to be used for some time after installation?

If the air conditioner is not to be used for some time after installation, you should turn off the power supply to the unit. The air conditioner draws a small amount of power in its standby mode.

How do I ensure proper drainage of the air conditioner?

Install the drain hose as described in the manual, with an inclination downward and no traps. Make sure the end of the hose is not submerged in water.

What is the correct torque for tightening the flare nuts?

Use torque wrenches to tighten the flare nuts to prevent damage and gas leakage. The torque varies depending on the pipe size and side (gas or liquid). Refer to the manual for specific torque values.