Delta 28-293

Manuals and User Guides for Delta 28-293. We found 1 manuals for free downloads instruction manual

Below you will find brief information for Wood Cutting Band Saw 28-293, Wood Cutting Band Saw 28-299. The DELTA Wood Cutting Band Saw 28-293 and 28-299 are heavy-duty machines designed for precise cutting of wood. They are equipped with a 1 HP, 115V guarded drip-proof motor inside an enclosed stand. You can tilt the table to the right 45 degrees or left 10 degrees for various cutting angles. And you can adjust the blade tension and tracking for different types of work. The band saw has a table insert, a blade and belt guard, and blade guides.

Key Features

  • 1 HP, 115V motor
  • Tilting table
  • Adjustable blade tension
  • Blade tracking adjustment
  • Table insert
  • Blade and belt guard

Pages: 16 Delta 28-293 instruction manual

Brand: Delta Category: Power tools Size: 239 KB

Languages: English

Open manual

Frequently Answers and Questions

How do I tilt the table on the DELTA Wood Cutting Band Saw?
To tilt the table to the right, loosen the two locking knobs, tilt the table to the desired angle, and tighten the locking knobs. To tilt the table to the left, loosen the locking knobs, tilt the table to the right until the table stop is accessible, remove the table stop, tilt the table to the left, and tighten the locking knobs.
How do I adjust the blade tension on the DELTA Wood Cutting Band Saw?
Use the knob on the back of the upper wheel slide bracket to adjust the blade tension. There are graduations to indicate the proper tension for different blade widths. Release the tension when the tool is not in use to prevent blade breakage.
How do I track the blade on the DELTA Wood Cutting Band Saw?
Rotate the wheels slowly forward by hand to check the blade's movement. If the blade creeps toward the front edge, loosen the wing nut and tighten the thumb screw to draw the blade toward the center. If the blade creeps toward the back edge, turn the thumb screw in the opposite direction. Adjust the thumb screw only a fraction of a turn each time. Never track the blade while the tool is running.

advertisement