Dixon F100 tool
Manuals and User Guides for Dixon F100 tool. We found 1 manuals for free downloads Operating instructions
Below you will find brief information for Band Clamp Tool F100 Jack-type tool. This tool is designed for applying 3/8" and 5/8" width band clamps to hoses. It includes a punch head, punch, pusher nose, holding dog, a clamp adapter, and other parts. It's easy to operate and includes detailed instructions on how to apply clamps to hoses.
Key Features
Applies 3/8" and 5/8" clamps
Jack-type tool
Includes clamp adapter
Easy operation
Detailed instructions
Pages: 2 Dixon F100 tool Operating instructions
Brand: Dixon Size: 998 KB
Languages: English
Open manualFrequently Answers and Questions
What size clamps can the F100 tool apply?
The F100 tool can apply both 3/8" and 5/8" width band clamps.
How do I use the clamp adapter?
To use the clamp adapter, hold the tool with the punch head raised and place the adapter under the pusher nose with the bent ends up. Push back until the shoulder rests against the front of the pusher nose.
How do I remove the cut-off band from the tool?
After locking the clamp, raise punch head to free punch. Hold the hose to keep it from turning and raise both handles of the tool up together to break off the band at the lock. To remove the cut-off end, operate the ball handle to work it through the holding dog. Then press the release lever and pull the strip out toward the rear of the tool.
advertisement