Envic DP-151
Manuals and User Guides for Envic DP-151. We found 1 manuals for free downloads Operating instructions
The DP-151 Programmable Panel Meter is a compact unit for flush panel mounting that can measure temperature using thermocouples or resistance thermometers, and for measurement of voltage, current, and resistance. The meter has a built-in programming capability, allowing users to select the input sensor, set alarm conditions, and configure other values. The display shows measurement values, alarm states, maximum and minimum values, and can be used to scale results over the entire measurement range and set offset values.
Key Features
Programmable input sensor selection
Adjustable alarm limits
Measurement scaling and offset
Maximum and minimum value display
Compact panel mounting
IP54 sealed front panel
Pages: 29 Envic DP-151 Operating instructions
Brand: Envic Category: Measuring, testing & control Size: 123 KB
Languages: English
Open manualFrequently Answers and Questions
What types of sensors can the DP-151 meter be used with?
The DP-151 can be used with thermocouples, resistance thermometers (e.g., Pt-100), voltage, current, and resistance sensors.
How do I program the DP-151 meter?
The DP-151 is programmed using the four front panel membrane push buttons and the display. The meter has a main program level and sub-program levels for setting sensor selection, alarm limits, scaling, and other values.
What are the alarm options available on the DP-151?
The DP-151 has two standard alarm limits with normally open relay outputs that are fully adjustable. Two additional alarm limits with transistor controlled outputs are available to special order.
What are the communication options available on the DP-151?
The DP-151 can be equipped with an RS-232C or RS-485 serial communication interface for transmitting measurement data.
What is the power supply voltage for the DP-151?
The standard power supply voltage is 230V 50Hz, but 24V and 12VDC versions are available on special order.
advertisement