Extech ExStik EC400

Manuals and User Guides for Extech ExStik EC400. We found 9 manuals for free downloads User's Guide, User Guide, User manual

Below you will find brief information for Conductivity Meter ExStik EC400. The ExStik EC400 is a versatile meter that can measure conductivity, total dissolved solids (TDS), salinity, and temperature. It features dynamic cell-constant technology, which allows it to measure a wide range of conductivity, TDS, and salinity with the same electrode. The meter also includes auto-ranging, data hold, and auto power off capabilities. It can store up to 25 readings and can be calibrated in any or all of the three ranges. The ExStik EC400 is ideal for use in a variety of applications, including water quality testing.

Key Features

  • Measures Conductivity, TDS, Salinity, and Temperature
  • Dynamic Cell-Constant Technology
  • Auto-Ranging
  • Data Hold
  • Auto Power Off
  • Stores up to 25 Readings
  • Calibratable in 3 Ranges

Pages: 11 Extech ExStik EC400 User's Guide

Brand: Extech Category: Measuring, testing & control Size: 344 KB

Languages: English

Open manual

Other manuals and documents

11 Pages

User's Guide

Languages: English

11 Pages

User Guide

Languages: English

23 Pages

User manual

Languages: German, English, French, ...

11 Pages

User manual

Languages: Spanish

11 Pages

User manual

Languages: French

11 Pages

User manual

Languages: Spanish

11 Pages

User manual

Languages: German

11 Pages

User manual

Languages: German

Frequently Answers and Questions

How do I change the measurement mode?
Press and hold the MODE/HOLD button for 2 seconds and the display will begin to scroll through the units. Release the MODE/HOLD button when the desired units are displayed.
How do I calibrate the meter?
Fill a sample cup with the standardizing solution. Turn the meter ON and insert the electrode into the solution. Tap or move the electrode in the sample to dislodge any air bubbles. Press and hold the CAL/RECALL button until “CAL” appears in the lower (temp) display. The meter will automatically recognize and calibrate to the standardizing solution.
How do I store a reading?
Press the MODE/HOLD button to store a reading. The storage location number will be displayed on the lower display, while the main display shows the stored reading. The meter will enter the HOLD mode and the “HOLD” indicator will appear.
How do I recall stored readings?
Press the CAL/RECALL button and then press the MODE/HOLD button. A location number (1 through 25) will briefly appear and then the value stored in that location will appear. Pressing and releasing the MODE/HOLD button will scroll through the stored readings one at a time.
How do I change the temperature units?
With the unit OFF, press and hold down the CAL/RECALL button. With the CAL/RECALL button depressed momentarily press the ON/OFF button. When “SELF CAL” appears in the display release the CAL/RECALL button.
How do I disable Auto Power Off?
Turn the unit on, press CAL/RECALL once (Quickly), immediately and simultaneously press the MODE/HOLD and ON/OFF buttons for approximately 2 seconds, until “oFF” is briefly displayed.

advertisement