Extron PLUS Model 10 PLUS

Below you will find brief information for video switcher Model 10 PLUS, video switcher Model 8 PLUS. The Extron Model 8 PLUS and Model 10 PLUS Switchers enable selection of anyone of eight (or ten) inputs with the following formats: RGBS, RGsB, S-Video/SVHS (Y/C) w/Stereo Audio follow, Composite Video (NTSC/PAL) w/Stereo Audio follow. The output video format of the Model 8/10 PLUS switchers will always be the same as the selected input video format. The Model 8 PLUS and Model 10 PLUS Switchers can be controlled through the RS-232 port by a Host device/system. The Model 8/10 PLUS Switchers treat any character that comes in on the RS-232 port as a possible command but accepts only a limited number as legal commands. The switcher RS-232 connector is used to connect to a computer for control of the switcher. The optional EXTRON KP-10 hard wired remote controller consists of a keypad, a 25 foot cable and a 25 pin D male connector that connects to the MANUAL REMOTE connector on the rear panel of the switcher. The optional EXTRON IR-10 infrared (IR) remote control is a hand held unit. It communicates with the Model 8 PLUS and Model 10 PLUS switchers through an external IR detector that is connected to an adapter. The adapter connects to the MANUAL REMOTE connector on the switcher rear panel and gets its power from the +5 volts on pin 13.

Key Features