FLORABEST FTP 400 A1

Manuals and User Guides for FLORABEST FTP 400 A1. We found 9 manuals for free downloads instruction manual, Manual, Operation manual, User manual, Owner's manual

Below you will find brief information for Submersible Water Pump FTP 400 A1. The submersible water pump is designed for pumping clean water with a maximum temperature of 35 °C. The pump is equipped with a float switch that automatically switches the pump on or off, and a backflow stop that prevents water from flowing back, for example during a power outage. The pump can be erected or suspended in the water.

Key Features

  • Automatic on/off function
  • Maximum discharge head of 7.5 meters
  • Maximum depth of immersion of 8 meters
  • Backflow stop
  • Adjustable suction level
  • Easy to clean and maintain

Other manuals and documents

78 Pages

Manual

Languages: Bulgarian, German, Greek, ...

48 Pages

Manual

Languages: German, Greek, English

48 Pages

Manual

Languages: German, English, Dutch

70 Pages

Operation manual

Languages: German, English, Spanish, ...

72 Pages

instruction manual

Languages: Danish, German, English, ...

76 Pages

User manual

Languages: German, English, Spanish, ...

54 Pages

Owner's manual

Languages: German, French, Italian, ...

94 Pages

Manual

Languages: Polish, Slovak, Slovenian

Frequently Answers and Questions

What is the maximum discharge rate of the pump?
The maximum discharge rate of the pump is 7000 l/h.
What is the maximum depth of immersion of the pump?
The maximum depth of immersion of the pump is 8 meters.
What is the maximum water temperature that the pump can handle?
The maximum water temperature that the pump can handle is 35 °C.
How do I clean the pump?
To clean the pump, use a water jet to remove any debris or dirt. You can also disassemble the pump to clean the paddle wheel and base.
How do I replace the backflow stop?
To replace the backflow stop, unscrew the adapter with the hose attachment and remove the backflow stop and seal. Insert the seal into the backflow stop and set the backflow stop between the angle adapter and the adapter with the hose connection.

advertisement