FLYGT 3153
Manuals and User Guides for FLYGT 3153. We found 1 manuals for free downloads: User manual
FLYGT 3153 Installation, Operation And Maintenance Manual
Brand: FLYGT Size: 2 MB Pages: 72
Languages: English
Table of contents
- 5 Introduction and Safety
- 5 Introduction
- 5 Safety
- 5 Safety terminology and symbols
- 6 Environmental safety
- 7 User safety
- 8 Ex-approved products
- 9 Product warranty
- 11 Transportation and Storage
- 11 Inspect the delivery
- 11 Inspect the package
- 11 Inspect the unit
- 11 Transportation guidelines
- 11 Precautions
- 11 Position and fastening
- 11 Lifting
- 12 Temperature ranges for transportation, handling and storage
- 12 Handling at freezing temperature
- 12 Unit in as-delivered condition
- 12 Lifting the unit out of liquid
- 13 Storage guidelines
- 13 Storage location
- 13 Freezing precautions
- 13 Long-term storage
- 14 Product Description
- 14 Pump design
- 15 Parts
- 16 Monitoring equipment
- 16 Optional sensors
- 16 The data plate
- 17 Approvals
- 17 Product approvals for hazardous locations
- 17 EN approval plate
- 18 IEC approval plate
- 18 FM approval plate
- 19 Product denomination
- 20 Installation
- 20 Install the pump
- 20 Authority regulation
- 20 Fasteners
- 21 Install with P-installation
- 22 Install with S-installation
- 23 Install with T/Z-installation
- 24 Make the electrical connections
- 24 General precautions
- 24 Requirements
- 25 Cables
- 25 Earthing (Grounding)
- 25 Connect the motor cable to the pump
- 26 Connect the motor cable to the starter and monitoring equipment
- 27 Cable charts
- 33 Sensor-connection
- 35 Check the impeller rotation
- 37 Operation
- 37 Precautions
- 37 Distance to wet areas
- 37 Noise level
- 37 Start the pump
- 39 Maintenance
- 39 Precautions
- 39 Maintenance guidelines
- 40 Torque values
- 41 Change the coolant
- 41 Empty the coolant
- 43 Fill with coolant
- 44 Service the pump
- 45 Inspection
- 46 Major overhaul
- 46 Service in case of alarm
- 46 Replace the impeller
- 46 Replace the impeller for wet installation
- 54 Replace the impeller for dry installation
- 64 Troubleshooting
- 64 Introduction
- 64 The pump does not start
- 65 The pump does not stop when a level sensor is used
- 65 The pump starts-stops-starts in rapid sequence
- 66 The pump runs but the motor protection trips
- 67 The pump delivers too little or no water
- 69 Technical Reference
- 69 Application limits
- 69 Motor data