First Alert 2602DF
Manuals and User Guides for First Alert 2602DF. We found 3 manuals for free downloads installation Guide, Installation and Operation Manual, Owner's manual
Below you will find brief information for 2601DF, 2602DF, 2603DF. This guide provides essential details on operating and installing your new waterproof fire safe, designed for secure storage of valuables and documents. It covers initial setup, programming a personal passcode for the digital lock, safe care, maintenance, and warranty information, ensuring peace of mind with fire and water protection.
Key Features
Waterproof protection for up to 1 hour when fully submerged
Fire-resistant, UL tested to keep interior below 350°F for 30 minutes at 1550°F
Digital lock with programmable 4-8 digit personal passcode
Manual key access for primary entry and override
Lifetime After Fire Replacement Guarantee
Low battery indicator for timely battery replacement
Requires opening and airing out for at least 20 minutes every two weeks
Designed for paper records and other valuable documents
Pages: 5 First Alert 2602DF installation Guide
Brand: First Alert Category: Padlocks Size: 1 MB
Languages: English
Table of contents
Open manualOther manuals and documents
Frequently Answers and Questions
How do I open my First Alert safe for the first time?
You can open the safe using the pre-set factory code (1-2-3-4-5 followed by *) or by inserting the key into the lock and turning it counterclockwise (to the left).
How do I program a personal passcode for my safe?
Open the safe, locate and remove the reset button cover, press the black reset button, then enter your new 4-8 digit passcode followed by *, re-enter the passcode again, and press *.
What happens if I enter an incorrect code multiple times?
If an incorrect code is entered 3 times in a row, the lock will automatically shut down for 4 minutes before it can be opened again using the correct code. During this delay, the key can still be used.
How often should I replace the batteries in my safe?
It is recommended to replace all batteries at least once a year or sooner, depending on the amount of use. Always replace all batteries at the same time.
Where can I find the key number for my safe?
The Key Number is engraved on the keys themselves and around the lock cylinder of your safe.
What items should not be stored in this safe?
This safe is not designed to store medication, items with combustible content, guns, or other weapons.
How should I clean my safe?
To clean your safe, wash it with a damp cloth and dry. Never use paint thinners or chemical solvents, as they can permanently damage the finish.
Questions & Answers
A A A
How is the reset button accessed?
Lift the lid of the safe. The reset button is black and located under a cover on the lid, which must be removed using a small Phillips screwdriver.
E E Q
How to disable the device from beeping when pressing a button?
The viewed document does not provide specific instructions on disabling the beeping sound when pushing buttons. The manual only mentions the keypad will beep when the power is low or if an incorrect code is entered.
advertisement