1. manualzz.com
  2. computers & electronics
  3. networking
  4. network switches

Foundry Networks EdgeIron switch

Manuals and User Guides for Foundry Networks EdgeIron switch. We found 1 manuals for free downloads User Guide

The Foundry Networks EdgeIron switch is a network device that provides connectivity and management for your network. It features a variety of protocols and features for configuring and managing your network, including VLANs, port security, and QoS. It provides high-performance switching and routing capabilities with a comprehensive feature set, ensuring seamless connectivity and network management.

Key Features

  • High-performance switching
  • VLAN support
  • Port security features
  • QoS capabilities
  • Network management tools
  • Secure Shell (SSH) access
  • 802.1x port access control
  • IP filtering
  • Multi-device port authentication
  • SNMP management

Pages: 458 Foundry Networks EdgeIron switch User Guide

Brand: Foundry Networks Category: Network switches Size: 3 MB

Languages: English

Open manual

Frequently Answers and Questions

How do I connect to the switch?
You can connect to the switch using a console cable, a Telnet connection, or a web browser interface. Details on connecting methods are found in the viewed document starting on page 2-1.
How do I set a password for the switch?
To set a password for the switch, you can use the 'enable password' command. To set a password for the console access, you can use the 'line console 0' command and then use the 'password' command. Refer to pages 2-4 and 2-5 in the viewed document for information on setting passwords.
How do I configure the switch to use DHCP?
You can configure the switch to use DHCP by using the 'ip address dhcp' command.
How do I enable SNMP on the switch?
To enable SNMP on the switch, you can use the 'snmp-server' command. This will activate the Simple Network Management Protocol (SNMP) agent on the device. Additionally, you may need to set a community string for access. You can find detailed instructions starting on page 10-1 of the viewed document.
How do I configure the switch to send email alerts?
Refer to the section ''Sending Simple Mail Transfer Protocol Alerts'' starting on page 7-10 in the viewed document. You can configure the switch to send email alerts by using the 'logging sendmail' command. This command lets you configure the SMTP server, email levels, and source and destination email addresses for sending alerts.
How do I check the current configuration of the switch?
The 'show running-config' command displays the current configuration of the switch, which includes any changes you've made. You can find specific details on this and other display commands in Chapter 3 of the viewed document.
Can I use this switch for bridge extension?
The viewed document mentions bridge extension capabilities. To find specific information about this functionality, use the 'show bridge-ext' command. You can learn more about bridge extension in Chapter 5, starting on page 5-18.

advertisement