Fujitsu iRMC S4
のためのマニュアルとユーザーガイド Fujitsu iRMC S4. 見つかりました 7 無料ダウンロード用マニュアル User Guide, User manual
Below you will find brief information for Remote Management Controller iRMC S4. The iRMC provides comprehensive control over PRIMERGY servers, irrespective of the system status. In particular, the iRMC allows for out-of-band management (Lights Out Management, LOM) of PRIMERGY servers. The enhanced functionality as of firmware version 7.6x of the iRMC S4, which comes with an integrated SD card, allows for comprehensive lifecycle management of a PRIMERGY server.
主な特徴
Out-of-band management
Integrated SD card
Embedded Lifecycle Management (eLCM)
Advanced Video Redirection (AVR)
Virtual Media
Power Management
User Management
Firmware Update
ページ: 62 Fujitsu iRMC S4 User Guide
ブランド: Fujitsu カテゴリー: Power conditioning サイズ: 3 MB
言語: English
マニュアルを開く他のマニュアルと文書
よくある質問と回答
How can I configure the LAN interface of the iRMC?
You can configure the iRMC’s LAN interface using the UEFI setup utility.
How do I log in to the iRMC for the first time?
The factory default settings of the iRMC allow you to log in to the iRMC for the first time without the need for any configuration activities.
What are the different types of user identifications used for iRMC?
User management for the iRMC uses two different types of user identifications: Local user identifications and Global user identifications.
What permissions can be assigned to users in the iRMC?
The iRMC distinguishes between two mutually complementary types of user permissions: Channel-specific privileges and permissions to use special iRMC functions.
質問 & 回答
Q Q X
How to manage the HTTP protocol settings?
The HTTP port (Port 80/TCP) is enabled by default and can be configured through the web interface or the command line interface.
C C F
What are the default login credentials for the iRMC S4?
The iRMC S4 factory default login credentials are as follows:
- User name:
admin - Password:
admin
These credentials are case-sensitive. For security reasons, it is highly recommended that you create a new administrator account immediately after your first login and delete the default administrator account, or at the very least, change the password.
D D R
How to configure RAID using the embedded Lifecycle Management (eLCM)?
To configure RAID interactively, power on the system and press [F5] during POST to access the eLCM menu, then select the RAID configuration function. For unattended operation, create a configuration profile and deploy it via the eLCM Deployment page in the iRMC web interface.
A A A
What are the available methods for updating the iRMC S4 firmware?
The iRMC S4 firmware can be updated using several methods: via the iRMC S4 web interface, using the ServerView Update Manager, conducting an online update using ServerView Update Manager Express or ASP, utilizing the operating system flash tools, and via the FlashDisk menu.
What Java setting must be enabled for AVD to function correctly?
Java caching must not be disabled.
How can RAID be managed?
RAID management is possible via the iRMC S4 web interface and the Remote Manager interface. Refer to the manuals for these interfaces for detailed steps.
How should keyboard settings be configured for AVD?
The keyboard language settings on the remote workstation and managed server must match. Ensure correct language mapping.
B B X
How to disable non-secure HTTP access?
In the iRMC web interface, navigate to the "Ports and Network Services" page, locate the "Force HTTPS" option, and enable it. This effectively disables HTTP communication, securing the connection via HTTPS.
広告