544 Manuals

Ganz ZN-D100VE

Manuals and User Guides for Ganz ZN-D100VE. We found 4 manuals for free downloads Manual, Installation manual

Ganz ZN-D100VE is an indoor fixed mini dome IP camera, suitable for basic surveillance. It provides high-quality video with a resolution of up to D1 (720x480 pixels) at 30 frames per second. The camera supports dual streaming mode, allowing you to configure different video streams with varying resolutions, bit rates, and codecs. It also features built-in video content analysis, which can be used to detect motion, intrusion, and other events. Additionally, the camera supports two-way mono audio, allowing for communication between the camera and a remote location.

Key Features

3-axis movement manual adjustment
Lens focus adjustment
Installation
Network Configuration
Web Interface for Live Video
IP Address Config
Advanced Setup with IPAdminTool
Firmware Update
Reboot Device

Pages: 19 Ganz ZN-D100VE Manual

Brand: Ganz Category: Security cameras Size: 1 MB

Languages: English

Open manual

Frequently Answers and Questions

What is the default IP address for the ZN-D100VE camera?

The default IP address is 192.168.XXX.XXX. You can find the specific IP address using the MAC address of the device.

How do I connect the ZN-D100VE camera to my network?

Connect the LAN cable and power supply cable to the camera. Make sure the polarity of the power supply connector is correct. Refer to the image in the manual for correct connector positions.

How do I adjust the focus of the lens?

Open the dome cover, remove the lens cover, rotate the lens focus ring to adjust focus, fasten the screw with an included hex wrench, and reattach the covers.

What if the live video is not displayed and shows an error message about installing MSXML4.0?

Download and install MSXML4.0 from the link provided in the manual. This library is required for the VCA Library to properly display images.

How do I change the IP address of the camera?

Access the camera's web interface, go to System Options > TCP/IP. Enter the desired IP address, Subnet mask, and Gateway. To use DHCP, select Obtain an IP address via DHCP.

What is ZNS-GIT IPAdminTool?

This is a utility program for IP products that provides features like configuring IP address, subnet mask, gateway, showing network information, updating firmware, and rebooting the device.