352 Manuals

Gecko in.k300

Manuals and User Guides for Gecko in.k300. We found 15 manuals for free downloads User manual, User Guide

Below you will find brief information for spa keypad in.k300. The spa keypad in.k300 is an affordable and easy-to-use control panel for hot tubs. It features a bright LCD screen and clear icons that make it easy to operate, even in low light conditions. The in.k300 is compatible with a variety of Gecko spa packs and can control a number of features, including the pump, heater, and lights.

Key Features

Bright LCD screen
Spa function icons
Affordable
Compact design
Easy to use
Compatible with a variety of Gecko spa packs
Controls pump, heater, and lights
Allows for programming of filter cycles, economy mode, and other settings
Provides error messages to help troubleshoot problems
Optional mounting with wing-nuts and spacers

Pages: 14 Gecko in.k300 User manual

Brand: Gecko Category: Numeric keypads Size: 2 MB

Languages: English

Open manual

Frequently Answers and Questions

What are the key features of the in.k300 Spa Keypad?

The in.k300 Spa Keypad features a bright LCD screen, spa function icons, is affordable and has a compact design making it easy to use. It's compatible with a variety of Gecko spa packs, and controls the pump, heater, and lights. It also allows for programming of filter cycles, economy mode, and other settings. In addition, the keypad provides error messages to help troubleshoot problems.

How many pumps does the in.k300 keypad support?

The in.k300 keypad supports 1 or 2 pumps.

How can I program the filter/purge cycles on the in.k300 keypad?

You can access the program menu by holding down the Light key for 5 seconds. You can then program the filter/purge cycles by adjusting the start time, duration (for filter cycles only), and frequency.

How do I set the temperature unit on the in.k300 keypad?

The temperature unit can be set to either Fahrenheit (°F) or Celsius (°C) using the arrow keys in the program menu.

What are the error messages that may appear on the in.k300 keypad?

The error messages include: FLO (No flow), HL (Warning! HL Error), HR (Danger! Relay stuck), OH (Warning! Spa temp. high), Prr (Warning! Temp. probes defective), AOH (Internal pack temp. high), FLC (Flow switch closed), SP in (Input voltage issue), FrEr (The input frequency is out of range), RH NC (Comm. error in.xm2 - in.therm), RH ID (in.xm2 - in.therm incompatible), SC ER (Learning mode error), F1 (in.xm2 Fuse # 1 is blown), F2 (in.xm2 Fuse # 2 is blown), F3 (in.xm2 Fuse # 3 is blown), Hr (Danger! Thermal fuse error), UPL (The spa pack does not have valid software. Please insert valid in.stick to reprogram spa pack.), BL (The spa pack does not have valid software. Please insert valid in.stick to reprogram spa pack.)