1. manualzz.com
  2. industrial & lab equipment

General Pump DFSCP20

Manuals and User Guides for General Pump DFSCP20. We found 1 manuals for free downloads User manual

Below you will find brief information for Flat Surface Cleaner DFSCP20. The Hammerhead Professional Flat Surface Cleaner is a heavy-duty concrete cleaner that can handle tough jobs such as removing paint, coatings, and other debris. The machine features a full 20-inch cleaning path, heavy-duty anodized aluminum components, and a rugged ABS cover. The Hammerhead is designed for use by professionals and is ideal for cleaning large areas of concrete. It is easy to assemble and operate. For maximum effectiveness, keep the spray tips clean. The Hammerhead is a versatile tool that can be used for a variety of cleaning tasks.

Key Features

  • Heavy-duty concrete cleaner
  • Full 20-inch cleaning path
  • Heavy-duty anodized aluminum components
  • Rugged ABS cover
  • Easy to assemble and operate

Pages: 2 General Pump DFSCP20 User manual

Brand: General Pump Category: Industrial & lab equipment Size: 1 MB

Languages: English

Open manual

Frequently Answers and Questions

How do I connect the Hammerhead to my pressure washer?
Connect the Hammerhead to your pressure washer by following the instructions in the Operator's Manual. Ensure the water is turned on and the valve is open. Open the trigger gun for flow of water through the nozzles. Make sure the nozzles have flowing spray. If not, remove the tips and clean and reassemble ensuring that the groove of the nozzle is parallel to the spray bar. Use pipe dope when installing nozzles.
What is the operating pressure of the Hammerhead?
The operating pressure of the Hammerhead is 1,000 to 4,000 PSI.
What should I do if I encounter any issues with the Hammerhead?
Check the 'weep holes' on the bottom of the swivel periodically to ensure water is seeping slowly. If water shoots out, stop and replace the seals. The swivel assembly can be rebuilt.
Can I use the Hammerhead on soft surfaces like wood?
No, do not allow the machine to remain stationary on soft surfaces such as wood. Striking any raised obstacle during operation will damage the machine. If contact does occur and results in vibration when operating the machine, STOP and replace the spray bar. Continued operation could result in serious injury or damage to the machine.

advertisement