HP 2500CP
のためのマニュアルとユーザーガイド HP 2500CP. 見つかりました 2 無料ダウンロード用マニュアル Service manual, User's Guide
Below you will find brief information for DesignJet Printers 2500CP, DesignJet Printers 2000CP. These manuals provide troubleshooting and service information for these large-format printers, covering error codes, stepper motor issues, and maintenance procedures. They assist in diagnosing and resolving problems, guiding users through testing and component replacement.
主な特徴
Large-format printing
Detailed troubleshooting guide
Stepper motor diagnostics
Error code lookup
Maintenance procedures
他のマニュアルと文書
よくある質問と回答
What should I do if I encounter error code 010035?
Check the electronics signal, stepper motors (elevator, refill, primer, service station, bail), interconnect cables, and replace faulty components as needed.
How do I perform service tests on the printer?
Hold down the UP and ENTER keys while switching the printer on. Then navigate to Utilities/Service Tests/Diagnostics to run tests.
What to do if error code 040xxx appears?
Check the MIO card. If the error persists after checking the MIO card, replace the MIO card; if the problem remains, replace the Electronics Module.
What causes error code 050000?
This indicates a problem with the Mark Encoder or Line Sensor. Clean the encoder, check sensor connections, and/or replace components.
What does error code 09xxxx indicate?
This points to a hard disk drive error. Try restarting the printer or check and replace the Hard Disk data or power cable, or hard disk itself.
広告