1. manualzz.com
  2. computers & electronics
  3. computer components

HP Dynamic Smart Array B120i

Manuals and User Guides for HP Dynamic Smart Array B120i. We found 1 manuals for free downloads User Guide

The HP Dynamic Smart Array B120i and B320i RAID Controllers are designed for those who install, administer, and troubleshoot servers and storage systems. The B320i supports SAS drives when the HP Smart Array SAS License Key is installed. The controllers support RAID 0, 1 and 1+0 configurations, and RAID 5 capabilities are available with the optional 512 MB FBWC module. The controllers support both SATA and SAS drives, and you can configure arrays and manage drives through the Array Configuration Utility (ACU).

Key Features

  • RAID 0, 1, 1+0

  • RAID 5 support

  • SATA and SAS support

  • ACU configuration tool

  • FBWC module support

  • Hot-plug drive support

  • Drive failure prediction

Pages: 37 HP Dynamic Smart Array B120i User Guide

Brand: HP Category: Computer components Size: 872 KB

Languages: English

Table of contents

Open manual

Frequently Answers and Questions

How do I enable the HP Dynamic Smart Array B120i RAID Controller?

You can enable the controller through the RBSU. At POST, press the F9 key to enter RBSU, and then select 'System Options > Embedded SATA Configuration > Enable Dynamic HP Smart Array B120i RAID Support'. Follow the on-screen prompts to enable the controller.

What is the FBWC module and what does it do?

The FBWC module is an optional upgrade for the HP Dynamic Smart Array B120i and B320i controllers. It provides 512 MB of Flash Backed Write Cache (FBWC) which enables RAID 5 capabilities. The FBWC module also has LEDs that indicate its status, such as the charging state of the capacitor pack.

How do I replace a failed hard drive in a RAID array?

Before replacing a hard drive, ensure you have a backup of your data. Once the server is powered down, you can remove and replace the failed drive. After powering the server back on, the RAID controller will automatically rebuild the data on the replacement drive. The time required for the rebuild depends on factors such as the size of the drive, the amount of I/O activity, and the type of RAID configuration.

Questions & Answers

2025-06-15

D D O

Does the B320i controller support SAS hard drives?

Yes, the B320i controller supports SAS hard drives after the HP Smart Array SAS license key is installed and activated.

advertisement