HP Engage Go RFID Reader
Manuals and User Guides for HP Engage Go RFID Reader. We found 1 manuals for free downloads User Guide
Below you will find brief information for Engage Go RFID Reader. This user guide covers how to configure the reader, enter read mode, update firmware, and adjust settings like output format, power, and tag read period. It also explains LED/buzzer indicators for status tracking, helping users efficiently manage inventory and assets with RFID tags.
Key Features
Configuration via physical button for easy setup
Two output modes: 25-tag buffer or continuous alternating tag detection
Adjustable output power (5–25 dBm) for range control
Customizable tag read period (500–1500 ms) for power/temperature balance
LED/buzzer indicators for status (read mode, config mode, updates)
Frequently Answers and Questions
How do I configure the RFID reader?
Press the configuration button, wait 5 seconds, open the RFID software, choose the correct PID/VID, and select Connect.
What are the output modes available?
There are two modes: 25 tags max (holds a 25-tag buffer, returns tags once) and alternative (continuously returns different EPC-IDs).
How do I update the firmware?
Press the configuration button, wait 5 seconds, open the RFID software, select Choose upgrade Package, verify the file, and select FW Upgrade.
What do the LED and buzzer signals mean?
One blink/beep: read mode or EPC-ID returned; one long blink/beep: configuration mode; two long blinks/beeps: ended configuration mode.
advertisement