HP Integrity BL860c
Manuals and User Guides for HP Integrity BL860c. We found 4 manuals for free downloads Service guide, Specification
HP Integrity BL860c Service Guide
Brand: HP Category: PC/workstation barebones Size: 5 MB Pages: 184
Languages: English
Table of contents
- 1 HP Integrity BL860c Server Blade User Service Guide
- 3 Contents
- 10 About This Document
- 10 Intended Audience
- 10 New and Changed Information in This Edition
- 10 Publishing History
- 10 Document Organization
- 11 Typographic Conventions
- 12 HP-UX Release Name and Release Identifier
- 12 Related Documents
- 12 Contacting HP
- 12 Before You Contact HP
- 13 HP Contact Information
- 13 Subscription Service
- 13 Documentation Feedback
- 14 1 Overview
- 14 Server Blade Overview
- 14 Server Blade Dimensions
- 14 Server Blade Components
- 15 SAS Disk Drives
- 16 SAS Backplane
- 16 I/O Subsystem
- 16 PCIe MPS Optimization
- 17 PCI Expansion Blade
- 17 Memory Subsystem
- 17 DIMMs
- 18 Add-On Memory
- 19 Power Subsystem
- 19 Processor and Core Electronics Complex
- 19 Enclosure Information
- 19 Controls, Ports, and LEDs
- 20 Front Panel View
- 20 Front Panel LEDs
- 21 SAS Disk Drive LEDs
- 22 Controls and Ports
- 23 SUV Cable and Ports
- 23 Rear Panel View
- 25 2 General Site Preparation Guidelines
- 26 3 Installing the Server Blade Into the Enclosure
- 26 Safety Information
- 26 Installation Sequence and Checklist
- 26 Unpacking and Inspecting the Server Blade
- 27 Verify Site Preparation
- 27 Inspect the Shipping Containers for Damage
- 27 Unpack the Server Blade
- 27 Check the Inventory
- 27 Damaged Equipment Returns
- 27 Installing Additional Components
- 28 Service Tools Required
- 28 Adding a Hot-Plug SAS Disk Drive
- 29 Installing Internal Components
- 29 Removing the Access Panel
- 30 Installing a Processor
- 32 Installing DIMMs
- 33 Installing Mezzanine Cards
- 35 Installing a Mezzanine Card in Port 1
- 36 Installing a Mezzanine Card to Ports 2 and 3
- 37 Replacing the Access Panel
- 38 Installing and Powering On the Server Blade
- 38 Installing the Server Blade into the c-Class Enclosure
- 39 Installing the PCI Expansion Blade
- 39 Server Power States
- 40 Powering On the Server Blade
- 40 Accessing the Integrated Lights Out 2 Management Processor
- 40 Accessing the iLO 2 MP with DHCP Enabled
- 42 Accessing the iLO 2 MP with No Network Connection
- 42 Connecting the SUV Cable to the Server Blade
- 43 Connecting a Terminal to the Server Blade
- 44 Configuring the iLO 2 MP
- 44 Accessing iLO 2 MP After Establishing a Connection to the Server Blade
- 45 iLO 2 MP Security Requirements
- 45 Securing Remote Access to the Server Blade
- 45 Setting the Server Blade to Power On Automatically
- 46 Configuring Remote Access to the Server Blade
- 47 Remote Access Allowed
- 48 Remote Access Not Allowed
- 48 Accessing EFI or the OS from iLO 2 MP
- 49 EFI Boot Manager
- 49 Saving EFI Configuration Settings
- 49 Booting and Installing the Operating System
- 49 Operating System is Loaded onto the Server Blade
- 49 Operating System is Not Loaded onto the Server Blade
- 49 Loading the Operating System Using HP-UX Ignite
- 49 OS Login Prompt
- 50 Server Blade to Enclosure Interface
- 50 Port Locations on the Rear of the Server Blade Enclosure
- 50 Server Blade to Enclosure Interconnect Mapping
- 51 LAN / NIC Configuration
- 51 Configuring the HP 2 Internal Port SAS Host Bus Adapter
- 51 MPTUTIL Utility
- 52 Flashing Firmware on First Controller
- 52 Flashing BIOS and EFI Driver on the First Controller
- 53 Common Questions About Flashing Firmware
- 53 Viewing the VPD Information for EFI Driver and RISC Firmware
- 53 EFI Commands
- 53 DRVCFG Utility
- 53 Starting the DRVCFG Utility
- 53 Using the DRVCFG Utility
- 54 Configuration Utility Screens
- 54 DRVCFG Utility Screens
- 54 Adapter List Screen
- 55 Adapter Properties Screen
- 56 RAID Properties Screens
- 57 Select New Array Type Screen
- 57 Create New Array Screen
- 59 View Array Screen
- 60 Manage Array Screen
- 60 Manage Hot Spare
- 61 Synchronize Array
- 61 Activate Array
- 61 Delete Array
- 61 Exit the SAS Configuration Utility Screen
- 61 CFGGEN Utility
- 62 Starting CFGGEN
- 62 CFGGEN Operation
- 62 Rules for Creating IM Volumes and Hot Spare Disks
- 62 CFGGEN Utility Commands
- 63 CREATE Command
- 63 Syntax
- 63 Parameters
- 63 Operation
- 63 AUTO Command
- 63 Syntax
- 63 Parameters
- 63 Operation
- 63 HOTSPARE Command
- 63 Syntax
- 64 Parameters
- 64 Operation
- 64 Verify and Install the Latest Firmware
- 64 Verify the Latest Version of Firmware
- 64 Download the Latest Version of Firmware
- 65 Install the Latest Version of Firmware on the Server
- 66 4 Booting and Shutting Down the Operating System
- 66 Operating Systems Supported on the Server Blade
- 66 Installing the Operating System onto the Server Blade
- 66 Installing the OS Using a USB DVD Drive and the OS Disks
- 67 Installing the OS from the External USB DVD Device
- 68 Installing the OS Using HP Ignite–UX
- 68 Installing the OS Using vMedia
- 68 Configuring System Boot Options
- 70 Booting and Shutting Down HP-UX
- 70 Adding HP-UX to the Boot Options List
- 70 Adding the HP-UX Boot Option
- 71 HP-UX Standard Boot
- 71 Booting HP-UX (EFI Boot Manager)
- 72 Booting HP-UX (EFI Shell)
- 73 Booting HP-UX in Single-User Mode (EFI Shell)
- 74 Booting HP-UX in LVM-Maintenance Mode
- 74 Shutting Down HP-UX
- 75 Booting and Shutting Down HP OpenVMS
- 75 Adding OpenVMS to the Boot Options List
- 76 Booting OpenVMS
- 76 Booting OpenVMS (EFI Boot Manager)
- 76 Booting HP OpenVMS (EFI Shell)
- 77 Shutting Down OpenVMS
- 78 Booting and Shutting Down Microsoft Windows
- 78 Adding Microsoft Windows to the Boot Options List
- 79 Booting the Microsoft Windows Operating System
- 80 Shutting Down Microsoft Windows
- 81 Shutting Down Windows from the Command Line
- 82 Booting and Shutting Down Linux
- 82 Adding Linux to the Boot Options List
- 83 Booting the Red Hat Enterprise Linux Operating System
- 83 Booting Red Hat Enterprise Linux from the EFI Shell
- 84 Booting the SuSE Linux Enterprise Server Operating System
- 84 Booting SuSE Linux Enterprise Server from the EFI Shell
- 85 Shutting Down Linux
- 86 5 Troubleshooting
- 86 Methodology
- 86 General Troubleshooting Methodology
- 87 Recommended Troubleshooting Methodology
- 88 Basic and Advanced Troubleshooting Tables
- 91 Troubleshooting Tools
- 91 Front Panel LEDs
- 92 Locator LED
- 92 Server Health LED
- 93 Internal Health LED
- 93 NIC LEDs
- 93 SAS Disk Drive LEDs
- 94 LAN LEDs
- 94 Boot Process LEDs
- 95 Diagnostics
- 95 Online Diagnostics/Exercisers
- 96 Online Support Tool Availability
- 96 Online Support Tools List
- 96 Offline Support Tool Availability
- 96 Offline Support Tools List
- 97 General Diagnostic Tools
- 97 Fault Management Overview
- 97 HP-UX Fault Management
- 98 WBEM indication providers and EMS Hardware Monitors
- 98 Errors and Error Logs
- 98 Event Log Definitions
- 98 Event Log Usage
- 99 iLO 2 MP Event Logs
- 99 System Event Log Review
- 101 Supported Configurations
- 101 System Build-Up Troubleshooting Procedure
- 102 Troubleshooting Processors/Memory/SBA
- 102 Troubleshooting Processors
- 103 Processor Installation Order
- 103 Processor Module Behaviors
- 103 Customer Messaging Policy
- 103 Troubleshooting Blade Memory
- 103 Memory DIMM Installation Order
- 103 Memory Subsystem Behaviors
- 103 Customer Messaging Policy
- 103 Troubleshooting Blade SBA
- 104 Enclosure Information
- 104 Cooling Subsystem
- 104 Troubleshooting Communications Modules
- 104 I/O Subsystem Behaviors
- 104 Customer Messaging Policy
- 105 Troubleshooting Management Subsystem
- 105 Firmware
- 105 Identifying and Troubleshooting Firmware Problems
- 105 Firmware Updates
- 106 Troubleshooting the Server Interface (System Console)
- 106 Troubleshooting the Environment
- 106 Reporting Your Problems to HP
- 107 Online Support
- 107 Phone Support
- 107 Information to Collect Before you Contact Support
- 108 6 Removing and Replacing Components
- 108 Service Tools Required
- 108 Removing and Replacing a Hot-Plug SAS Disk Drive
- 108 Removing a SAS Disk Drive
- 109 Replacing a SAS Disk Drive
- 109 Removing and Replacing Disk Drive Blanks
- 109 Removing a Disk Drive Blank
- 110 Replacing a Disk Drive Blank
- 110 Preparing the Server Blade for Servicing
- 110 Powering Off the Server Blade
- 111 Removing and Replacing the Server Blade from the Enclosure
- 111 Removing the Server Blade From the Enclosure
- 111 Replacing the Server Blade in the Enclosure
- 112 Removing and Replacing the Server Blade Access Panel
- 112 Removing the Server Blade Access Panel
- 112 Replacing the Server Blade Access Panel
- 113 Removing and Replacing Internal Components
- 114 Removing and Replacing DIMMs
- 114 Removing a DIMM
- 114 DIMM Installation Order
- 115 DIMM Configuration
- 115 Replacing a DIMM
- 115 Removing and Replacing a Processor
- 116 Removing a Processor
- 117 Installing a Processor
- 119 Removing and Replacing the SAS Backplane
- 119 Removing the SAS Backplane
- 120 Installing the SAS Backplane
- 120 Removing and Replacing the Front Display Assembly
- 120 Removing the Front Display Assembly
- 121 Replacing the Front Display Assembly
- 121 Removing and Replacing the Server Battery
- 122 Removing the Server Battery
- 123 Replacing the Server Battery
- 123 Removing and Replacing the Mezzanine Cards
- 123 Removing a Mezzanine Card
- 124 Replacing a Mezzanine Card
- 124 Removing and Replacing a Cache Module
- 125 Removing a Cache Module
- 126 Replacing the Cache Module
- 130 Removing and Replacing the Low Profile Battery Backed Write Cache (BBWC) Battery
- 130 Removing the BBWC Battery
- 132 Replacing the BBWC Battery
- 140 Removing and Replacing the Trusted Platform Module
- 140 Removing the TPM
- 141 Replacing the TPM
- 142 Removing and Replacing the System Board
- 142 Removing the System Board
- 144 Replacing the System Board
- 146 A Parts Information
- 146 Server Blade Components List
- 148 B Server Upgrades
- 148 Processor Upgrades
- 148 Upgrading Versus Adding On
- 148 Firmware
- 148 Operating Systems
- 150 C Utilities
- 150 NVRAM Backup Utility
- 150 Downloading and Installing the NVRAM Backup Utility
- 150 Using the NVRAM Backup Utility
- 150 Syntax
- 150 Parameters
- 151 Extensible Firmware Interface
- 152 EFI Commands
- 154 EFI/POSSE Commands
- 154 Help
- 154 Syntax
- 154 Parameters
- 154 Operation
- 157 baud
- 157 Syntax
- 157 Parameters
- 157 Operation
- 157 boottest
- 157 Syntax
- 158 Parameters
- 158 cpuconfig
- 158 Syntax
- 158 Parameters
- 158 Operation
- 159 conconfig
- 159 Syntax
- 159 Parameters
- 159 Notes
- 160 default
- 160 Syntax
- 160 Parameters
- 160 Operation
- 160 errdump
- 160 Syntax
- 161 Parameters
- 161 Operation
- 161 info
- 161 Syntax
- 161 Parameters
- 165 ioconfig
- 165 Syntax
- 165 Parameters
- 165 Operation
- 166 lanaddress
- 166 Syntax:
- 166 Parameters
- 166 monarch
- 167 Syntax
- 167 Parameters
- 167 Operation
- 167 pdt
- 167 Syntax
- 167 Parameters
- 167 Operation
- 168 sysmode
- 168 Syntax
- 168 Parameters
- 168 Operation
- 169 Specifying Parameters
- 169 Using the Setup Utility
- 174 Using the Boot Option Maintenance Menu
- 174 EFI Shell Paths
- 174 Boot From a File
- 175 Add a Boot Option
- 175 Delete Boot Option(s)
- 175 Change Boot Order
- 176 Manage BootNext Setting
- 176 Set Auto Boot TimeOut
- 177 Select Active Console Output Devices
- 177 Select Active Console Input Devices
- 178 Select Active Standard Error Devices
- 178 Using the System Configuration Menu
- 179 Security/Password Menu
- 179 Resetting Passwords
- 179 Integrated Lights Out 2 Management Processor
- 180 Index
HP Integrity BL860c Service Guide
Brand: HP Category: PC/workstation barebones Size: 3 MB Pages: 157
Languages: English
Table of contents
- 8 Server blade overview
- 9 Server blade components
- 10 Server blade dimensions and weight
- 10 Enclosure information
- 10 Enclosure environmental specifications
- 11 Sample Site Inspection Checklist
- 13 Power subsystem
- 13 ESD handling information
- 13 Unpacking and inspecting the server blade
- 14 Verifying site preparation
- 14 Inspect the shipping containers for damage
- 14 Unpacking the server blade
- 14 Verifying the inventory
- 14 Returning damaged equipment
- 15 Installation sequence and checklist
- 15 Installing and powering on the server blade
- 15 Preparing the enclosure
- 16 Removing a c7000 device bay divider
- 17 Removing a c3000 device bay mini-divider or device bay divider
- 18 Installing interconnect modules
- 19 Interconnect bay numbering and device mapping
- 20 Installing the server blade into the enclosure
- 21 Server blade power states
- 22 Powering on the server blade
- 22 Powering off the server blade
- 22 Installing the Blade Link for BL870c i2 or BL890c i2 configurations
- 25 Conjoin checks
- 25 Using iLO 3
- 26 Accessing UEFI or the OS from iLO 3 MP
- 27 UEFI Front Page
- 28 Saving UEFI configuration settings
- 28 Booting and installing the operating system
- 29 Operating system is loaded onto the server blade
- 29 Operating system is not loaded onto the server blade
- 29 OS login prompt
- 29 Installing the latest firmware using HP Smart Update Manager
- 30 Operating systems supported on the server blade
- 30 Installing the operating system onto the server blade
- 30 Installing the OS from an external USB DVD device or tape device
- 31 Installing the OS using HP Ignite-UX
- 31 Installing the OS using vMedia
- 32 Configuring system boot options
- 32 Booting and shutting down HP-UX
- 32 Adding HP-UX to the boot options list
- 33 HP-UX standard boot
- 33 Booting HP-UX from the UEFI Boot Manager
- 34 Booting HP-UX from the UEFI Shell
- 34 Booting HP-UX in single-user mode
- 34 Booting HP-UX in LVM-maintenance mode
- 34 Shutting down HP-UX
- 35 Booting and shutting down HP OpenVMS
- 35 Adding OpenVMS to the Boot Options List
- 36 Booting OpenVMS
- 36 Booting OpenVMS from the UEFI Boot Manager
- 36 Booting HP OpenVMS from the UEFI Shell
- 37 Shutting Down OpenVMS
- 37 Booting and shutting down Microsoft Windows
- 37 Adding Microsoft Windows to the boot options list
- 39 Booting the Microsoft Windows operating system
- 39 Shutting down Microsoft Windows
- 40 Shutting down Windows from the command line
- 41 Partner blades
- 42 Hot-plug SAS disk drives
- 43 Installing internal components
- 43 Removing the access panel
- 44 Processor and heatsink module
- 49 DIMMs
- 52 Mezzanine cards
- 53 HP Smart Array P700m/512 Controller
- 53 Battery kit and other components
- 54 Battery mounting bracket parts
- 55 Installing the Controller Board
- 56 Upgrading or replacing controller options
- 56 Replacing the 512MB cache module
- 57 Replacing the battery mounting bracket
- 58 Replacing the BBWC battery
- 60 Removing upgrade components
- 60 Removing the 512MB cache module
- 60 Removing the battery mounting bracket
- 61 Removing the BBWC battery
- 62 HP Smart Array P711m Controller
- 62 Supercap pack mounting kit
- 63 Installing the Supercap mounting bracket
- 64 Installing the P711m controller board
- 64 Installing the Supercap Pack
- 65 Replacing the access panel
- 66 Upgrading a conjoined configuration
- 66 Procedure summary
- 66 Upgrade kit contents
- 67 Before getting started
- 67 Supported operating systems
- 68 Minimum firmware versions
- 68 Determining your current firmware revisions
- 68 Server blade
- 69 OA
- 71 VCM
- 72 Rules for server blade internal components
- 72 Processor loading and matching rules
- 73 DIMM matching and loading rules
- 73 ICH mezzanine boards
- 73 Optional mezzanine cards
- 73 Upgrading the existing server blade
- 73 Existing server blade check
- 73 Adding resources
- 78 Final hardware check
- 79 Booting the operating system
- 79 Warranty registration
- 80 Support
- 80 Blade link and system information parameters
- 81 Operating System Licenses
- 81 HP-UX
- 81 HP OpenVMS
- 81 Windows Server 2008
- 82 Upgrade scenarios which do not require a reinstall of the operating system
- 82 Possible changes due to VC profile mapping on the upgraded server blade
- 84 Preserving VC-assigned MAC addresses in HP-UX by enabling Portable Image
- 85 Pre-Upgrade Procedure for PI
- 85 Post-Upgrade Procedure for PI
- 87 Methodology
- 87 General troubleshooting methodology
- 88 Executing recommended troubleshooting methodology
- 88 Basic and advanced troubleshooting tables
- 91 Troubleshooting tools
- 92 Controls and ports
- 92 Front panel view
- 93 Rear panel view
- 93 Server blade LEDs
- 93 Front panel LEDs
- 95 SAS disk drive LEDs
- 95 SAS hard drive LED combinations
- 96 Blade Link LEDs
- 96 Virtual Front Panel LEDs in the iLO 3 TUI
- 99 SUV Cable and Ports
- 99 Connecting to the serial port
- 100 Diagnostics
- 100 Offline Diagnostics Environment
- 100 General diagnostic tools
- 101 Fault management overview
- 101 HP-UX Fault management
- 101 Errors and error logs
- 101 Event log definitions
- 102 Event log usage
- 102 iLO 3 MP event logs
- 104 SEL review
- 105 Troubleshooting processors
- 105 Processor installation order
- 105 Processor module behaviors
- 105 Enclosure information
- 105 Cooling subsystem
- 105 Firmware
- 105 Identifying and troubleshooting firmware issues
- 106 Verify and install the latest firmware
- 106 Troubleshooting the server interface (system console)
- 106 Troubleshooting the environment
- 108 Server blade components list
- 110 Preparing the server blade for servicing
- 110 Powering off the server blade
- 110 Blade Link for BL870c i2 or BL890c i2 configurations
- 110 Removing the Blade Link for BL870c i2 or BL890c i2 configurations
- 111 Replacing the Blade Link for BL870c i2 or BL890c i2 configurations
- 112 Blade Link for BL860c i2 configurations
- 113 Server blade
- 113 Access panel
- 114 Disk drive blanks
- 114 Removing a disk drive blank
- 114 Disk drives
- 115 DIMM baffle
- 116 DIMMs
- 117 CPU baffle
- 118 CPU and heatsink module
- 121 SAS backplane
- 122 Server battery
- 123 Mezzanine cards
- 124 ICH mezzanine board
- 124 System board
- 125 Blade Link
- 127 Contacting HP
- 127 Before you contact HP
- 127 HP contact information
- 127 Subscription service
- 127 Documentation feedback
- 128 HP Insight Remote Support Software
- 128 New and changed information in this edition
- 128 Typographic conventions
- 133 Configuring a Smart Array Controller
- 133 Using the saupdate command
- 133 get_mode
- 134 set_mode
- 134 Updating the firmware using saupdate
- 134 Determining the Driver ID and CTRL ID
- 135 Configuring RAID volumes using the ORCA menu-driven interface
- 136 Creating a logical drive
- 137 Deleting a logical drive
- 138 Useful UEFI command checks
- 139 UEFI
- 139 UEFI Shell and HP POSSE commands
- 142 Drive paths in UEFI
- 142 Using the Boot Maintenance Manager
- 143 Boot Options
- 143 Add Boot Option
- 144 Delete Boot Option
- 145 Change Boot Order
- 146 Driver Options
- 146 Add Driver Option
- 147 Delete Driver Option
- 147 Change Driver Order
- 147 Console Options
- 147 Boot From File
- 148 Set Boot Next Value
- 148 Set Time Out Value
- 149 Reset System
- 149 iLO 3 MP
HP Integrity BL860c Specifications
Brand: HP Category: PC/workstation barebones Size: 436 KB Pages: 18
Languages: English
Table of contents
- 3 Introduction
- 3 Integrity server blade architecture
- 3 HP Integrity BL860c i4 Server Blade details
- 4 Balanced I/O architecture
- 5 HP Integrity BL870c i4 Server Blade details
- 5 HP Integrity BL890c i4 Server Blade details
- 5 Scalable blade technology
- 5 Supported technologies
- 7 Supported enclosures
- 8 Processor technologies
- 8 Multilevel caches
- 8 Hyper-threading
- 9 Instruction replay technology
- 9 Integrated memory controllers and Scalable Memory Interconnect
- 9 Enhanced instructions-level parallelism
- 10 QuickPath Interconnect architecture
- 10 Thermal logic technologies
- 11 Reliability, availability, and serviceability technologies
- 11 Processor reliability, availability, and serviceability (RAS) improvements
- 11 Memory RAS features
- 11 Intel QPI RAS features
- 12 Processor socket technology
- 13 I/O technologies
- 13 PCIe technology
- 13 HP Smart Array controllers
- 13 SAS technology
- 14 Optional mezzanine cards
- 14 Networking technology
- 14 Virtual Connect
- 15 Configuration and management technologies
- 15 HP BladeSystem Onboard Administrator
- 16 HP Integrity iLO 3
- 16 HP Insight Control for HP-UX
- 16 Power management technologies
- 16 Power meter
- 16 OS power regulation
- 16 HP Dynamic Power Capping
- 17 Data security technology with TPM
- 17 Partition Technologies
- 17 Physical nPartition support
- 17 HP-UX virtual partitions
- 18 Conclusion
- 18 For more information
HP Integrity BL860c Specifications
Brand: HP Category: PC/workstation barebones Size: 5 MB Pages: 125
Languages: English
Table of contents
- 9 Server blade overview
- 9 Server blade dimensions and weight
- 10 Server blade components
- 10 SAS disk drives
- 11 SAS disk backplane
- 11 I/O subsystem
- 11 Partner blade support
- 11 Memory subsystem
- 12 DIMMs
- 12 Power subsystem
- 12 Processor and supporting chipset
- 12 ICH mezzanine card
- 12 Scaleable BladeLink
- 13 Enclosure information
- 14 Controls, ports, and LEDs
- 14 Front panel view
- 15 Front panel LEDs
- 16 SAS disk drive LEDs
- 16 SAS hard drive LED combinations
- 18 Scaleable BladeLink LEDs
- 19 SUV Cable and Ports
- 19 Rear panel view
- 21 Enclosure environmental specifications
- 23 Safety information
- 23 Installation sequence and checklist
- 23 Unpacking and inspecting the server blade
- 23 Verify site preparation
- 24 Inspect the shipping containers for damage
- 24 Unpack the server blade
- 24 Check the inventory
- 24 Damaged equipment returns
- 24 Installing additional components
- 25 Installing a hot-plug SAS disk drive
- 26 Installing internal components
- 26 Removing the access panel
- 27 Installing a processor and heatsink module
- 32 Installing DIMMs
- 36 Installing mezzanine cards
- 37 Replacing the access panel
- 38 Installing and powering on the server blade
- 38 Preparing the enclosure
- 39 Removing a c7000 device bay divider
- 40 Removing a c3000 device bay mini-divider or device bay divider
- 41 Installing interconnect modules
- 42 Interconnect bay numbering and device mapping
- 43 Installing the server blade into the enclosure
- 45 Installing the Scaleable BladeLink
- 47 Server blade power states
- 47 Powering on the server blade
- 47 Powering off the server blade
- 47 Using iLO
- 48 Accessing UEFI or the OS from iLO MP
- 48 UEFI Front Page
- 50 Saving UEFI configuration settings
- 50 Booting and installing the operating system
- 50 Operating system is loaded onto the server blade
- 50 Operating system is not loaded onto the server blade
- 50 OS login prompt
- 51 Installing the latest firmware using HP Smart Update Manager
- 53 Operating systems supported on the server blade
- 53 Installing the operating system onto the server blade
- 53 Installing the OS from the external USB DVD device
- 53 Installing the OS using HP Ignite–UX
- 54 Installing the OS using vMedia
- 54 Configuring system boot options
- 54 Adding HP-UX to the boot options list
- 55 Booting and shutting down HP-UX
- 55 HP-UX standard boot
- 56 Booting HP-UX from the UEFI Boot Manager
- 56 Booting HP-UX from the UEFI Shell
- 56 Booting HP-UX in single-user mode
- 57 Booting HP-UX in LVM-maintenance mode
- 57 Shutting down HP-UX
- 59 Methodology
- 59 General troubleshooting methodology
- 60 Executing recommended troubleshooting methodology
- 60 Basic and advanced troubleshooting tables
- 64 Troubleshooting tools
- 64 Diagnostics
- 64 Offline Diagnostics Environment
- 65 General diagnostic tools
- 65 Fault management overview
- 65 HP-UX Fault management
- 65 Errors and error logs
- 65 Event log definitions
- 66 Event log usage
- 66 iLO MP event logs
- 67 SEL review
- 68 Troubleshooting processors
- 68 Processor installation order
- 68 Processor module behaviors
- 68 Enclosure information
- 68 Cooling subsystem
- 68 Troubleshooting the management subsystem
- 68 Firmware
- 68 Identifying and troubleshooting firmware issues
- 69 Verify and Install the Latest Firmware
- 69 Troubleshooting the server interface (system console)
- 69 Troubleshooting the environment
- 71 Preparing the server blade for servicing
- 71 Powering off the server blade
- 72 Removing and replacing the server blade from the enclosure
- 72 Removing the server blade
- 72 Replacing the server blade
- 72 Removing and replacing the server blade access panel
- 72 Removing the server blade access panel
- 73 Replacing the server blade access panel
- 73 Removing and replacing a disk drive blank
- 73 Removing a disk drive blank
- 73 Replacing a disk drive blank
- 74 Removing and replacing a disk drive
- 74 Removing a disk drive
- 74 Replacing a disk drive
- 75 Removing and replacing the Scaleable BladeLink
- 75 Removing the Scaleable BladeLink
- 76 Replacing the Scaleable BladeLink
- 77 Removing and replacing the DIMM baffle
- 77 Removing the DIMM baffle
- 77 Replacing the DIMM baffle
- 78 Removing and replacing DIMMs
- 78 Removing DIMMs
- 78 Replacing DIMMs
- 79 Removing and replacing the CPU baffle
- 79 Removing the CPU baffle
- 79 Replacing the CPU baffle
- 80 Removing and replacing a processor and heatsink module
- 80 Removing a processor and heatsink module
- 81 Replacing a processor
- 81 Removing and replacing the SAS backplane
- 81 Removing the SAS backplane
- 82 Replacing the SAS backplane
- 83 Removing and replacing the server battery
- 83 Removing the server battery
- 83 Replacing the server battery
- 83 Removing and replacing the mezzanine cards
- 83 Removing a mezzanine card
- 84 Replacing a mezzanine card
- 84 Removing and replacing the ICH mezzanine board
- 84 Removing the ICH mezzanine board
- 85 Replacing the ICH mezzanine board
- 85 Removing and replacing the system board
- 87 Contacting HP
- 87 Before you contact HP
- 87 HP contact information
- 87 Subscription service
- 87 Documentation feedback
- 87 Typographic conventions
- 91 Server blade components list
- 93 UEFI
- 93 UEFI Shell and HP POSSE commands
- 96 Drive paths in UEFI
- 96 Using the Boot Maintenance Manager
- 97 Boot Options
- 97 Add Boot Option
- 98 Delete Boot Option
- 99 Change Boot Order
- 99 Driver Options
- 100 Add Driver Option
- 101 Delete Driver Option
- 101 Change Driver Order
- 101 Console Options
- 101 Boot From File
- 102 Set Boot Next Value
- 102 Set Time Out Value
- 103 Reset System
- 103 iLO MP
- 105 Battery kit and other components
- 105 Battery mounting bracket parts
- 106 Installing the Controller Board
- 106 Upgrading or replacing controller options
- 106 Replacing the 512MB cache module
- 107 Replacing the battery mounting bracket
- 108 Replacing the BBWC battery
- 110 Removing upgrade components
- 110 Removing the 512MB cache module
- 111 Removing the battery mounting bracket
- 112 Removing the BBWC battery
- 115 Using the saupdate command
- 115 Get Mode
- 116 Set Mode
- 116 Updating the firmware using saupdate
- 116 Determining the Driver ID and CTRL ID
- 117 Configuring RAID volumes using the ORCA menu-driven interface
- 118 Creating a logical drive
- 119 Deleting a logical drive
- 120 Useful UEFI command checks