HYTROL DCEZ 60
Manuals and User Guides for HYTROL DCEZ 60. We found 1 manuals for free downloads Owner's manual
Below you will find brief information for Drag Chain Conveyor DCEZ 60. The Drag Chain Conveyor DCEZ 60 is a series of accumulation zones, each zone having an EZLogic® accumulation kit, and an accumulation lift module to lift the load up off the constantly moving drag chain. The sequence of "loading" and "unloading" the conveyor is as follows:
Key Features
- EZLogic® accumulation system
- Accumulation Lift module to lift loads
- Sequence of loading and unloading
- Zone stop signal
- Slug input signal
- Zone wake-up signal
Pages: 36 HYTROL DCEZ 60 Owner's manual
Brand: HYTROL Category: Electrical equipment & supplies Size: 1 MB
Open manualFrequently Answers and Questions
What is the EZLogic® accumulation system?
The EZLogic® accumulation system is a control system that allows the conveyor to accumulate loads in defined zones.
What is the sequence of loading and unloading the conveyor?
Loads are placed on the conveyor and move forward until they reach the discharge zone. The discharge zone is deactivated, causing the lift module to move the load back down onto the chain and the load then moves forward, creating a gap between itself and the next load. This sequence continues as long as the preceding load continues to move forward.
What are the auxiliary connections used for?
The auxiliary connections can be used to accept either a zone stop signal, a slug input signal, or a zone wake-up signal by simply connecting an auxiliary input cable to the auxiliary port and then wiring the two wires of the cable to any "dry contact" type switching device, such as a toggle switch or relay.
advertisement