1349 Manuals

Hioki 3285-20

Manuals and User Guides for Hioki 3285-20. We found 2 manuals for free downloads instruction manual

Below you will find brief information for Clamp-on AC/DC HiTester 3285-20. This manual describes the features and operation of the Clamp-on AC/DC HiTester 3285-20, including measuring DC, AC or AC+DC current in live power lines without tapping into or connecting the lines. It also covers voltage, frequency and resistance measurements, and continuity checks. The manual provides detailed instructions on how to use the instrument safely and effectively.

Key Features

Large current measurement up to 2000 A
True rms values display
DC, AC, AC+DC current & voltage measurements
Peak measurement for voltage and current
REC function for recording max/min values
Auto-zero-adjustment function
Zero-cancel correction function
Data hold function
Auto power-off function
Beep Tone

Clamp-on AC/DC HiTester 3285-20 Instruction Manual

Pages: 88 Hioki 3285-20 instruction manual

Brand: Hioki Category: Multimeters Size: 2 MB

Languages: English

Open manual

Frequently Answers and Questions

How do I switch between different measurement modes?

You can switch between different measurement modes using the buttons indicated on the front of the device. For example, to measure DC current, press the button. Refer to the manual for a complete description of all modes and button functions.

What are the various ranges available for measurement?

The Clamp-on AC/DC HiTester offers various ranges for measuring current, voltage, and frequency. The available ranges can be selected using the RANGE button. The manual provides a detailed table of available ranges for each measurement mode.

How do I perform auto-zero-adjustment?

Auto-zero-adjustment is performed by pressing the 0ADJ/RESET button. This function ensures accurate readings by compensating for any internal offsets. The manual provides detailed instructions on how to perform auto-zero-adjustment for different measurement modes.

How do I replace the battery?

To replace the battery, remove the two screws on the back of the device, remove the rear cover, and then remove the old battery. Connect a new battery to the battery snap and replace the rear cover, tightening the screws.

What is the maximum current rating for this instrument?

The 3285-20 Clamp-on AC/DC HiTester can measure up to 2000 Amps. However, it is important to note that the accuracy of the measurement varies depending on the current range and the frequency of the current being measured. Refer to the manual for detailed specifications.