Hunter XC
Manuals and User Guides for Hunter XC. We found 12 manuals for free downloads Owner's manual, User manual
Hunter XC is an easy-to-use irrigation controller with flexible programming options to keep your lawn and garden looking their best. It features three independent programs (A, B, C) that can be customized to meet the unique watering needs of different areas of your landscape. Each program offers four start times per day and adjustable run times from 1 minute to 4 hours per station. The XC also allows you to select specific days of the week or intervals between watering days, providing ultimate control over your irrigation schedule. Additionally, the seasonal adjustment feature enables you to easily adjust run times by a percentage, ensuring efficient water use throughout the year. The Hunter XC's large LCD display and intuitive interface make programming a breeze, while its rugged construction and weather-resistant design ensure reliable operation. Backed by Hunter's renowned customer support, the XC is the perfect choice for homeowners seeking a dependable and versatile irrigation controller.
Key Features
3 Independent Watering Programs with 4 daily start times each
Seasonal adjustment from 10% to 150% of original run times
Programmable rain off (1 to 7 days)
Easy Retrieve Program Memory for saving and recalling settings
Hunter Quick Check™ diagnostics for wiring problems
Programmable delay between stations (0 to 4 hours)
Sensor override by station for customized watering
Flexible watering schedules: Specific days, Odd/Even, or Interval
Non-volatile memory to retain program data during power outages
Electronic short circuit protection for safety
Pages: 18 Hunter XC Owner's manual
Brand: Hunter Category: Weather stations Size: 256 KB
Languages: English
Table of contents
Open manualOther manuals and documents
Frequently Answers and Questions
How do I set the current time and day on the controller?
Turn the dial to the CURRENT TIME/DAY position. Use the + or - buttons to adjust the year, then press the button to proceed to set the month, day, and finally the time (AM/PM or 24hr, hours, then minutes).
How can I temporarily stop all watering for a period of days?
Turn the dial to the SYSTEM OFF position. Wait for "OFF" to be displayed, then press the + button to set the number of days off (from 1 to 7). The controller will resume normal operation after this period.
How do I manually run a single irrigation station?
Turn the dial to the MANUAL – ONE STATION position. Use the + or - button to select the desired station and set its run time. Then, turn the dial clockwise to the RUN position to start watering that station.
What happens to the programmed settings during a power failure?
The XC controller has non-volatile memory, so all programmed information is saved and will not be lost. The internal lithium battery will maintain the correct time, and normal watering will resume automatically once AC power is restored.
How do I reset the controller to its factory default settings?
With the dial in the RUN position, press and hold the PRG, +, and - buttons simultaneously. While holding these, press and release the reset button in the lower wiring compartment. After a 2-second pause, release the PRG, +, and - buttons. The display should then show 12:00 am, indicating all memory has been cleared.
Questions & Answers
L L J
How to reset the controller to factory default settings?
Press and hold the -, +, and PRG buttons. Press and release the reset button located in the lower wiring compartment, then wait 2 seconds and release all buttons. The display will show 12:00 am when memory is cleared.
How to set watering start times on the controller?
Turn the dial to START TIMES and select Program A, B, or C using the PRG button. Use the + or - button to adjust the start time in 15-minute increments. Press > to add additional start times if needed. Setting a single start time activates all stations sequentially in that program.
O O V
How to use programs A, B, and C?
Programs A, B, and C allow you to separate plants with different watering needs on different day schedules. To select the program, press the button labeled with the program letters.
N N X
How to set the irrigation days on the programmer?
Turn the dial to the WATER DAYS position and use the PRG button to select the desired program (A, B, or C). Navigate through the days of the week and use the (+) button to activate irrigation (drop icon) or the (-) button to cancel it (crossed-out drop icon). You may also select odd, even, or interval watering by moving the cursor to those specific options.
M M X
How to reset the device memory and clear all programs?
Simultaneously hold the minus (-), right arrow (>), and PRG buttons. While holding them, press and release the reset (RST) button located in the wiring compartment. Release the buttons after 2 seconds; the display showing 12:00 am confirms that the memory has been cleared.
A A X
How to adjust the watering days on the controller?
Turn the dial to WATER DAYS and select the desired program (A, B, or C) using the PRG button. Use the arrow keys to navigate the days of the week and press the '+' button to activate a day (water drop icon) or the '-' button to deactivate it (crossed-out drop icon). You can also set Odd/Even days or a watering interval of 1 to 31 days by scrolling past the specific days of the week.
F F X
How to set the irrigation days on the XC controller?
Turn the knob to WATER DAYS and select the program (A, B, or C). You can then choose specific days of the week, odd or even days, or set an irrigation interval between 1 and 31 days.
K K X
How to set the irrigation days on the XC controller?
Turn the knob to WATER DAYS and select the program (A, B, or C). You can then choose specific days of the week, odd or even days, or set an irrigation interval between 1 and 31 days.
S S X
How to set the irrigation days on the Hunter XC controller?
Rotate the dial to WATER DAYS and select the desired program (A, B, or C) using the PRG button. Use the + button to activate irrigation for a specific day (raindrop icon) or the - button to deactivate it (crossed-out raindrop). You can also set odd/even days or an interval by navigating past Sunday.
advertisement